The advantage of an electric window regulator is huge compared to manual systems. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not always easy to precisely determine the origin of the problem. With this article we will find out how to replace the electric window regulator on a Volkswagen Iltis . But before you start, you need to be sure you know where the failure is coming from. Let's be clear, from time to time it's unnecessary to change the entire window regulator, a simple repair will sometimes work. Whether it concerns an electrical short circuit, or quite simply a lack of lubrication. Now that you're sure what's causing the problem, let's get back to our topic.change-window-Volkswagen-Iltis

How to replace a Volkswagen Iltis window regulator

Changing a window regulator is quite long. Depending on your expertise in the field, plan approximately three hours to make sure you don't get caught up in the weather. Whether for a Volkswagen Iltis or another car, this manipulation is for experienced DIY enthusiasts. So let's look at what to do, point by point. We recommend that you take a picture in several steps to help you fit the new window regulator.

Removing a window regulator on a Volkswagen Iltis

  • Remove the entire door trim. From the handle to the retro cover. This manipulation must be done quite delicately using a flat screwdriver. Care must be taken to access the window regulator at all points without being disturbed. This step is the longest to perform.
  • Remove the window regulator seals from your Volkswagen Iltis. Again, it's important to go about it gently.
  • Now that you have access to the window regulator, remove the connectors. You can then release the motor from the window regulator in the event that it is stuck.
  • Remove all the clips that hold the glass, then release the glass. From time to time it is better to position the window halfway up to perform this manipulation. Of course you have to be extremely careful when moving the window. It is advisable to put it on a rather thick sheet.
  • Remove the window regulator completely. It is important to remember your position well. You can take a picture of it if it helps you attach the new window regulator. The window regulator is from time to time held by screws or rivets, it will therefore be necessary to remove them.

Installing an electric window regulator on a Volkswagen Iltis

  • Fit the new window regulator. Check that its position is similar to the damaged window regulator. You will certainly need to use the fasteners you removed.
  • Reposition the glass the same way you removed it. From time to time it will be necessary to make it move a little so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Fit the seals you removed.
  • Replace all of the door trim.

It's done, you now have a new and functional window regulator . You can therefore switch on the ignition and test it.