The advantage of an electric window regulator is undeniable in comparison with manual systems. However, it has the defect of being much more complex in terms of repairs. Also, it is not necessarily easy to pinpoint the source of the problem. With this article, we will discover how to change the electric window regulator of a Volkswagen Iroc . But before seeing the procedure to follow, you must be sure to understand where the dysfunction came from. Indeed, it is from time to time unnecessary to replace the entire window regulator, a simple repair can sometimes work. Whether it's a false contact, or simply a lack of oiling. Now that you are sure of the nature of the concern, let's get to the heart of the matter.
How to replace a Volkswagen Iroc window regulator
The replacement of a window regulator is rather long. Depending on your experience on the subject, plan approximately three hours to make sure you don't get caught up in time. Whether it's for a Volkswagen Iroc or another car, this operation is for experienced DIY enthusiasts. So let's look at what to do, step by step. We advise you to take photos at different times to help you reassemble the new window regulator.
Removing a window regulator on a Volkswagen Iroc
- Dismantle the entire door trim. From the handle to the mirror cover. This should be done very gently using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being disturbed. This step is the longest to execute.
- Disassemble the window regulator seals from your Volkswagen Iroc. Again, it is essential to do this with care.
- Now that you have accessed the window regulator, disconnect the connectors. You can then release the window lifter motor if it is blocked.
- Release all the fasteners that hold the glass, then remove it. It is from time to time preferable to position the window halfway up to carry out this operation. Obviously you will have to be extremely careful when handling the glass. It is best to put it on a sufficiently thick sheet.
- Disassemble the window regulator completely. It is essential to memorize your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held by screws or rivets, it will therefore be necessary to remove them.
The installation of an electric window regulator of a Volkswagen Iroc
- Introduce the new window regulator. Make sure that its location is similar to the damaged window lifter. You should definitely use the bindings you have set aside.
- Replace the glass just as you took it out. It will be necessary from time to time to rotate it slightly so that it fits correctly in its guide.
- Connect the connectors.
- Fit the seals that you have carefully removed.
- Replace all of the door trim.
That's it, you now have a new and working window regulator . You can therefore turn on your car and test it.