The advantage of an electric window regulator is undeniable compared to manual window regulators. Nevertheless, it has the defect of being much more complicated in terms of repairs. In addition, it is not always easy to determine precisely the nature of the problem. With this article, we will see how to replace the electric window regulator of a Volkswagen Jetta . But before seeing the procedure to follow, you must be sure to understand where the failure comes from. Indeed, it is from time to time unnecessary to change the entire window regulator, a simple repair will sometimes work. Whether it's a false contact, or just a lack of lubrication. Now that you are sure of the nature of the problem, let us return to our subject.
Replacing a window regulator from Volkswagen Jetta: how to do it
Replacing a window regulator is relatively time-consuming. Depending on your expertise on the subject, count about two o'clock to make sure you don't get caught up in time. Whether for a Volkswagen Jetta or another car, this manipulation is for experienced DIY enthusiasts. So let's look at how to do it, step by step. It is advisable to take pictures at different times to help you install the new window regulator.
Removing a window regulator on a Volkswagen Jetta
- Remove all of the door trim. From the mirror cover to the handle. This should be done relatively gently with a flat screwdriver. You will have to make sure to access the window regulator at any point without being embarrassed. This manipulation is quite long to execute.
- Remove the window regulator seals from your Volkswagen Jetta. Again, it is crucial to do it carefully.
- Now that you have accessed the window regulator, remove the connectors. You must then disengage the window regulator motor in the event that it is blocked.
- Release all the fasteners that hold the glass, then remove it. It is from time to time more advisable to place the window halfway up to be able to carry out this operation. Of course you will have to be very careful when moving the window. It is best to place it on a sufficiently thick sheet.
- Remove the window regulator entirely. It is essential to remember your position well. You can take a picture of it if it helps you to install the new window regulator. The window regulator is from time to time held in place by screws or rivets, it is therefore necessary to remove them.
The installation of an electric window regulator of a Volkswagen Jetta
- Present the new window regulator. Make sure that its location is identical to the damaged window regulator. You probably need to use the fasteners you have set aside.
- Replace the glass as you removed it. It will be necessary from time to time to rotate it a little so that it fits properly in its guide.
- Reconnect the connectors.
- Replace the seals you removed.
- Replace all of the door trim.
It's good, you now have a new and working window regulator . You must therefore switch on the ignition and test it.