Replacing the mirror in a rearview mirror is really easy. However, it is a little less so for replace the complete mirror . Don't worry either, it's a completely accessible operation for a beginner mechanic , on a Hyundai Veloster or any type of vehicle. For information, be aware that a missing or damaged rear view mirror can be condemned by a ticket of 68 euros. Fortunately, there is no loss of point on the license for this concern. Only the left and inside mirrors are required . The right mirror becomes mandatory when the visibility of the interior mirror is hampered. But let's see what really concerns us, that is to say the replacement of retro .
How to change the complete rear view mirror of a Hyundai Veloster
To replace your Hyundai Veloster rearview mirror , you can count approximately one half-hour . Experienced DIY enthusiasts will do this by a quarter of an hour only. However, not all mirrors are necessarily easy to replace , it varies depending on the options on board. So let's see what to do point by point.
- First remove the cover at the rear view mirror inside the cabin of the Hyundai Veloster
- For a model mechanical : it will generally be necessary to remove or unclip the adjustment wheel
- For a model electric : You will have to disconnect the connector. Sometimes it is not extremely accessible, it will then be necessary to remove the door trim.
- Unscrew and unclip all the fasteners that hold the damaged mirror
- Install the new mirror on the Hyundai Veloster
- Set up all the fastening systems, and check that they are correctly in place
- For mechanical mirrors: put back the wheel
- For electric mirrors: connect the connector
- Replace the cover in place
- Testing the rear view mirror of the Hyundai Veloster
On the electrical ranges, it sometimes happens that an electrical fault restricts the proper functioning of the retro. In this case, it is not necessarily mandatory to replace it. You just need to check that the connector is not cluttered, or follow the wiring to find a possible short circuit. So, fixing the false contact will be enough for the retro of this Hyundai Veloster to start working as it should.