Replacing the mirror in a rearview mirror is super simple. But it is a little less so for replace the complete mirror . No worries either, it remains an absolutely doable manipulation for a sunday handyman , on a Toyota Cs & s or any type of car. For information, note that a missing or damaged mirror can result in a fine of 68 euros. However, it is impossible to lose a point on the license for this concern. Only the left and interior mirrors are required . The right mirror is mandatory in the event that the use of the interior mirror is hampered. But let's see what really interests us, the replacement of retro .change-mirror-Toyota-Cs & s

How to change the complete mirror of a Toyota Cs & s

In order to change your Toyota Cs & s rear view mirror , you can plan approximately half-hour . Experienced DIY enthusiasts can take care of this by a quarter of an hour only. But not all mirrors are always the same easy to change , it varies depending on the options on board. So let's see what to do point by point.

  • You must first remove the cover on the mirror inside the cockpit of your Toyota Cs & s
  • For a model mechanical : it will usually be necessary to unscrew or unclip the adjustment wheel
  • For a model electric : you will have to disconnect the connector. Sometimes the latter is not extremely accessible, it will then be necessary to disassemble the door trim.
  • Unscrew and remove all of the fasteners that hold the damaged mirror
  • Position the new mirror on your Toyota Cs & s
  • Position all of the fastening systems, and check that they are well fixed
  • For mechanical mirrors: replace the wheel
  • For electric mirrors: connect the connector
  • Replace the cover
  • Test the mirror of your Toyota Cs & s

On electric models, it sometimes happens that an electrical fault prevents the correct functioning of the retro. In this situation, it is not necessarily necessary to change it. You just have to check that the connector is clean, or follow the wire to find a possible short circuit. In this situation, isolating the electrical fault will be enough for the Toyota Cs & s retro to start working normally.