Now we find turbos on a lot of vehicles on the market, whether engines essences ou Diesel. Before starting these manipulations it will naturally be necessary to be sure that the problem comes from the turbo of the famous Citroen Picasso. However, if you are on this page, it reveals that you probably know the source.change-turbo-Citroen-Picasso

How to change the turbo of your Citroen Picasso

Compared to the turbo to be presented, the procedures may vary slightly. When you get a turbo it is always supplied with a manual. The best thing to do is therefore to read it. However, in the event that you have not yet made the purchase, find out the main lines to replace a turbo in a Citroen Picasso. This way you will know if you are capable of it or not. Just before you start, you must have all of the tools required. You will have the utility of your receptacle for engine oil, a set of ratchet wrenches, flat pliers, allen wrenches as well as flat wrenches. Typically, these turbos will be sold with their tool kit that contains joints, studs and a dose oil. We still recommend that you have a professional check since working from a pit is even more convenient to do these procedures. In addition, the turbo remains a fairly delicate component for a Citroen Picasso. You should know that the handling is not super difficult, we advise you to go to a professional.

  • Drain the engine and replace your oil filter. Add a little oil, but very little. This is a necessary procedure!
  • Remove all the plugs around the turbo of your Citroen Picasso.
  • Check that there are no residues on the casings, as this can be a cause of malfunction.
  • Remove the conduits as well as each of the screws and nuts that will support your turbo.
  • Remove the existing turbo from this Citroen Picasso.
  • Set up the brand new turbo, checking that the locations correspond precisely
  • Replace the oil return pipe
  • Replace all the required screws and nuts
  • Fill the turbo with oil from your syringe
  • Rotate the turbine with your hands to rotate the turbo.
  • Refit all the components to the turbo of your Citroen Picasso.
  • Once all the components are assembled, you need to start the engine and run it for ten minutes.

Now that the turbo is in place but also that the car has been running for ten minutes, do not hesitate to take a ride in this Citroen Picasso in order to check that the whole is turning properly. At the same time, we advise you to check the quantity of oil and water fairly frequently in the following weeks. Leave a comment if you have ever used this tutorial. Good walk !