Now we find these turbos in most vehicles in circulation, as many on systems essences ou Diesel. Before starting the DIY you will obviously have to be certain that the malfunction comes from the turbo of this Citroen Saxo Vts. However, if you are on this page, it shows that you certainly know the source.change-turbo-Citroen-Saxo-Vts

How to change the turbo of your Citroen Saxo Vts

Depending on the turbo to be presented, methods may fluctuate a bit. As soon as you buy a turbocharger, the product will be systematically delivered with an instruction manual. The best thing to do is therefore to follow it point by point. On the other hand in the case where you have not yet bought the product, you will find below the steps to follow in order to be able to replace a turbo on your Citroen Saxo Vts. So you will understand whether you are capable of it or not. Just before you start, make sure you have all of the tools adequate. You will use your oil receptacle, a set of ratchet wrenches, flat pliers, allen wrenches as well as flat wrenches. In general, these turbochargers will be sold with their tool kit which includes joints, studs as well as a dose oil. However, we advise you to go to a professional because working with a pit turns out to be even more practical to carry out these works. In addition, the turbocharger remains a super fragile component for a Citroen Saxo Vts. Taking into account that the operation is not really difficult, we still advise you to go to a technician.

  • Drain the engine block then replace your oil filter. Add a little oil, but not too much. Here is an imperative manipulation!
  • Remove all the plugs around the turbocharger of the Citroen Saxo Vts.
  • Check that there are no foreign bodies inside the housings, as this is sometimes a cause of problem.
  • Remove the ducts and all of the screws as well as the nuts that will support your turbocharger.
  • Remove the failed turbocharger from the Citroen Saxo Vts.
  • Install the all-new turbocharger, checking that the locations fully match
  • Install the oil return pipe
  • Install all required screws and nuts
  • Fill the turbocharger with oil from your syringe
  • Rotate the turbine with your hands to activate the turbocharger.
  • Reconnect all the connections to the turbocharger of this Citroen Saxo Vts.
  • As soon as all the components turn out to be in place, you can start the engine block and let it run for 5 to 10 minutes.

Now that everything is in order and of course the engine has been running for at least 5 minutes, you should take a drive at the wheel of the Citroen Saxo Vts so that you can see that everything is running smoothly. We also advise you to check the oil level but also the water level regularly for 15 days. Leave a comment in case this tutorial was useful to you. Enjoy the road!