Today we find these turbos on many cars on the market, whether for engines essences ou Diesel. Before starting these manipulations, you obviously have to be certain that the hassle arises from the turbo of this Citroen Traction 11. However, since you are reading this article, this means that you probably know the source.change-turbo-Citroen-Traction-11

How to change the turbo of your Citroen Traction 11

Depending on the turbo to be positioned, procedures may fluctuate very slightly. When you purchase a turbocharger, the product will usually be delivered with an assembly note. The ideal is that you follow it to the letter. However, in the event that you have not made the purchase, find out how to change it to be able to change a turbo in the Citroen Traction 11. Thereafter you will know what capacities are required. Just before you start, make sure you have all of the tools adequate. You are going to have the use of an oil container, a bunch of ratchet wrenches, flat pliers, allen and flat wrenches. Usually, these turbos are sold with their tool kit which contains joints, studs as well as a dose oil. We still advise you to have a check made by a professional simply because working from a pit is even easier to carry out the manipulations. And of course, the turbocharger is a really fragile element in this Citroen Traction 11. Even if the operation is not very difficult, we still advise you to go to a garage.

  • Drain the engine, then change the oil filter. Replace a little oil, without putting too much. It is a necessary step!
  • Remove all the plugs found on the turbocharger of your Citroen Traction 11.
  • Check that there are no residues in the casings, because this is undoubtedly a cause for concern.
  • Remove the ducts and all the screws and nuts that will support the turbocharger.
  • Remove the turbocharger in place in your Citroen Traction 11.
  • Install the famous turbocharger, checking that the locations stick precisely
  • Fit the oil return pipe
  • Install all the screws and nuts you removed
  • Fill the turbocharger with the supplied oil
  • Operate the turbine with your hands to turn the turbocharger.
  • Connect all the elements to the turbocharger of this Citroen Traction 11.
  • Once all the parts turn out to be in place, you can start the engine and run it for ten minutes.

Now that everything is in place but also that the engine has been running for ten minutes, do not hesitate to drive your Citroen Traction 11 to see that everything is running well. It is also advisable to check the oil level but also the water level quite often in the coming days. Leave a comment in case this tutorial helped you. Good walk !