Today we find these turbos in most new automobiles, whether it's systems essences ou Diesel. Just before starting this task you must of course be convinced that the problem comes from the turbo of this Citroen Traction 15. However if you are reading us, this means that you probably know the source.change-turbo-Citroen-Traction-15

How to change the turbo of your Citroen Traction 15

Depending on the turbo to be installed, procedures may change slightly. When you buy a turbo the product will usually be delivered with a note of achievement. The best thing to do then is to follow it step by step. That said, in the event that you have not yet purchased the product, here are the steps to be taken to be able to change a turbo compressor for your Citroen Traction 15. In fact you will understand what capacities are necessary. Just before you start, make sure you have all of the tools adequate. You will have the utility of your container for engine oil, a set of ratchet wrenches, your flat pliers, your allen and flat wrenches. Usually, the turbochargers are found to be supplied with their mounting kit comprising joints, studs and a portion oil. We still suggest that you go to a professional since working from a pit remains much more practical for the procedures. And of course, the turbo happens to be a super fragile element for this Citroen Traction 15. You should know that the operation is not extremely complicated, it is nevertheless advised to go to a technician.

  • Drain the engine block then change this oil filter. Replace a bit of oil, but very little. This is an essential phase!
  • Remove all the plugs found on the turbo of this Citroen Traction 15.
  • Check that there are no desirable non-elements in the casings, because that is sometimes a source of concern.
  • Remove the ducts with all the screws and nuts which support this turbo.
  • Remove the turbo in place in this Citroen Traction 15.
  • Install the famous turbo, checking that the locations stick completely
  • Install the oil return pipe
  • Replace the screws and nuts you removed
  • Fill the turbo with the oil supplied with the turbo
  • Operate the turbine with your hands to operate the turbo.
  • Reconnect all of the elements to the turbo of the Citroen Traction 15.
  • As soon as the parts turn out to be assembled, you can start the engine block and run it for 5 to 10 minutes.

Now that the turbo is in place and of course that the engine has been running for ten minutes, it is necessary to walk around with this Citroen Traction 15 in order to examine that the assembly is working properly. It is also advisable to watch the oil level but also the water level regularly in the days to come. Post a comment if our tutorial was useful to you. Enjoy again!