Now we find these turbos on a lot of cars in circulation, whether in systems essences ou Diesel. Before starting these manipulations it is obviously necessary to be certain that the problem arises from the turbo of this Citroen Tubik. But since you are on this page, it means you most likely know the source.
How to change the turbo of your Citroen Tubik
Depending on the turbo to be installed, the procedures may fluctuate slightly. When you buy a turbocharger, the product will usually come with a performance note. The ideal is therefore to follow it point by point. However if you have still not made the purchase, here are the steps to follow in order to replace a turbo compressor in a Citroen Tubik. Thereafter you will know what abilities are needed. Before you start, be careful to have all the tools required. You will need an oil receptacle, a set of ratchet wrenches, flat pliers, allen and flat wrenches. Often, these turbos will be delivered with a mounting kit which includes some jointsFew studs but also a syringe oil. We still recommend that you have a professional check that working with a pit is more convenient for carrying out the procedures. What is more, the turbocharger remains a particularly fragile element on this Citroen Tubik. Even if the operation is not super difficult, we still advise you to go to a technician.
- Drain the engine then replace the oil filter. Replace a small amount of oil. Here is an imperative manipulation!
- Remove all the plugs from the Citroen Tubik turbocharger.
- Watch that we do not find non desirable elements within the casings, because this is sometimes a cause of problem.
- Remove the ducts and of course all the screws but also the nuts which allow the turbocharger to be held.
- Remove the turbocharger in place in this Citroen Tubik.
- Reassemble the famous turbocharger, checking that the locations are totally suitable
- Fit the oil return pipe
- Install all the screws and nuts you removed
- Fill the turbocharger using the oil supplied
- Rotate the turbine by hand to activate the turbocharger.
- Assemble all the components to the turbocharger of this Citroen Tubik.
- Now that when all the parts are found to be installed, you must start the engine and let it run for a few minutes.
Once the assembly is installed but also that the car has been running for a few minutes, you can take a ride behind the wheel of this Citroen Tubik so as to verify that the assembly turns well. It is also advisable to check the oil and water level quite frequently in the days to come. Leave a comment in case this text served you. Enjoy the road!