Now we find these turbos on a lot of new vehicles, whether for systems essences ou Diesel. Just before starting work, of course, you have to be sure that the turbo fault has occurred in this hyundai i20. Having said that, since you've come this far, it probably means you know the source.change-turbo-hyundai-i20

How to change the turbo of your Hyundai i20

Depending on the turbo to be presented, the methods may vary very slightly. When you purchase a turbocharger the product will usually be sold with an assembly instructions. The ideal is therefore that you read it. However, if you have not yet made the purchase, here are the main points to replace a turbo in the hyundai i20. Then you will understand what capacities are needed. Before you start, be careful to have all of the tools indispensable. You will use your receptacle for engine oil, a set of ratchets, your flat pliers, allen and flat wrenches. Often the turbos will be delivered with their assembly kit which includes some jointsFew studs but also a dose oil. We still recommend that you go to a pro since working with a pit turns out to be more practical to carry out these manipulations. In addition, the turbocharger turns out to be a really sensitive component on a hyundai i20. Even if the handling is not very complex, we still advise you to go to a garage.

  • Drain the engine block then replace this oil filter. Add a little oil, without putting too much. This is a necessary procedure!
  • Remove all the plugs present around the turbocharger of your hyundai i20.
  • Check that there are no foreign bodies on the casings, since this is undoubtedly the source of the problem.
  • Remove the ducts with all the screws as well as the nuts which will hold this turbocharger.
  • Remove the existing turbocharger from your hyundai i20.
  • Install the new turbocharger, checking that the seals stick precisely
  • Install the oil return pipe
  • Install the necessary screws and nuts
  • Fill the turbocharger using the oil supplied with the turbo
  • Rotate the turbine with your hands to activate the turbocharger.
  • Assemble all the components to the turbocharger of this hyundai i20.
  • Once the parts are fitted, you must start the engine block and let it run for a few minutes.

Once everything is in place but also that the car has been running for 5 to 10 minutes, you will be able to walk around with your hyundai i20 so as to check that the assembly is working well. At the same time, we advise you to check the oil level but also the water level quite frequently in the days to come. Leave a comment if this tutorial was helpful. Enjoy again!