Now there are turbos in most new vehicles, whether in systems essences ou Diesel. Just before embarking on this task, you must naturally be certain that the malfunction came from the turbo of the famous Hyundai I30 (3rd Generation) N. But since you are reading this article, it is because you probably know the reason.changer-turbo-Hyundai-I30- (3e-Generation) -N

How to change the turbo of your Hyundai I30 (3rd Generation) N

Compared to the turbo to be installed, the procedures can vary very slightly. In case you buy a turbo the product will usually be sold with a performance note. It is best to follow it to the letter. However, if you have still not made the purchase, here are the steps to follow in order to replace a turbo compressor in this Hyundai I30 (3rd Generation) N. In this way you will know if you are capable or no. Just before you start, make sure you have all of the tools required. You are going to need your oil container, a set of ratchet wrenches, flat pliers, allen wrenches as well as flat wrenches. Often these turbos are found to be supplied with a tool kit which contains joints, studs but also a dose oil. We still advise you to have a check done by a pro because tinkering from a pit turns out to be easier to do this kind of manipulation. And of course, the turbo remains a rather fragile element for the Hyundai I30 (3rd Generation) N. Even if the operation is not extremely laborious, we still advise you to go to a mechanic.

  • Change the engine block oil and replace your oil filter. Add a small amount of oil. It is an inevitable manipulation!
  • Remove all the plugs around the turbo of this Hyundai I30 (3rd Generation) N.
  • Check that there are no foreign bodies inside the housings, since this can be a source of malfunction.
  • Remove the conduits and of course all the screws and then the nuts which will hold your turbo.
  • Remove the faulty turbo from your Hyundai I30 (3rd Generation) N.
  • Reassemble the famous turbo, checking that the locations match exactly
  • Replace the oil return pipe
  • Install all of the screws and nuts you removed
  • Fill the turbo with the oil supplied with the turbo
  • Rotate the turbine by hand to activate the turbo.
  • Reattach all the turbo connections of this Hyundai I30 (3rd Generation) N.
  • Once all the components are installed, you will start the engine block and operate it for 5 to 10 minutes.

Once everything is installed and screwed and of course the engine has been running for at least 5 minutes, it is possible to take a ride behind the wheel of your Hyundai I30 (3rd Generation) N so as to see that the assembly turns correctly . At the same time, we recommend that you check the oil and water level regularly in the weeks that follow. Write a comment in case our text helped you. Enjoy the road!