Now we find the turbos in much of the automobiles of the last 20 years, whether it's systems essences ou Diesel. Just before embarking on this task you must of course be certain that the malfunction occurs from the turbo of the famous Hyundai Ix55. However, since you are on this page, it indicates that you certainly know the cause.change-turbo-Hyundai-Ix55

How to change the turbo of your Hyundai Ix55

Compared to the turbo to be positioned, methods may fluctuate a bit. In the event that you purchase a turbocharger, the product will be systematically delivered in the company of an instruction manual. The best thing to do then is to follow it step by step. But in the event that you have not yet purchased the product, discover the main lines so as to change a turbo compressor on the Hyundai Ix55. This way you will know if you are capable of it or not. Before starting, make sure you have all of the tools required. You will use your oil receptacle, a set of ratchet wrenches, your flat pliers, allen and flat wrenches. Typically, turbos are sold with their batch of utensils including joints, studs and a portion oil. We still suggest you go see a specialist since working with a pit is even easier to do the procedures. In addition, the turbocharger is a very fragile component in this Hyundai Ix55. You should know that the operation is not really difficult, it is nevertheless advisable to go to a garage.

  • Change the engine block oil and change the oil filter. Add a little oil, without putting too much. This is an essential procedure!
  • Remove all the plugs that there are on the turbocharger of the famous Hyundai Ix55.
  • Check that there are no foreign bodies in the housings, as this is a cause for concern.
  • Remove the ducts and of course all the screws as well as the nuts which will hold the turbocharger.
  • Remove the faulty turbocharger from your Hyundai Ix55.
  • Reassemble the new turbocharger, checking that the seals are completely suitable
  • Refit the oil return pipe
  • Refit all the necessary screws and nuts
  • Fill the turbocharger using oil from your syringe
  • Rotate the impeller by hand to rotate the turbocharger.
  • Assemble all the connections to the turbocharger of the Hyundai Ix55.
  • Once all of the components are in place, you will start the engine block and let it run for a few minutes.

Now that everything is installed and screwed and the engine has been running for 5 to 10 minutes, do not hesitate to wander around in your Hyundai Ix55 so as to check that the assembly is working properly. It is advisable at the same time to check the level of oil but also of water quite frequently in the days to come. Write a comment in case this guide was useful to you. Enjoy the road!