Nowadays we find the turbos on a lot of vehicles on the market, as many on systems essences ou Diesel. Just before starting DIY, you will naturally have to be certain that the problem comes from the turbo of the famous Hyundai Kona. That said, since you are on this page, it means that you are likely aware of the cause.change-turbo-Hyundai-Kona

How to change the turbo of your Hyundai Kona

Depending on the turbo to be positioned, manipulations may vary slightly. When you buy a turbocharger, the product will be systematically sold with an instructions for use. The ideal is then that you follow it to the letter. However if you have not yet made the purchase, here are the main ways to change a turbo for your Hyundai Kona. In fact you will know what capabilities are needed. Just before you start, make sure you have all of the tools indispensable. You will need an oil container, a set of ratchet wrenches, flat pliers, allen and flat wrenches. Very often, these turbochargers turn out to be delivered with a mounting kit including some jointsFew studs and a little oil. We still suggest that you have a specialist check since working with a pit is more practical for carrying out these procedures. What's more, the turbocharger remains a particularly delicate element on a Hyundai Kona. Taking into account that the operation is not particularly difficult, we still advise you to go to a garage.

  • Drain the engine block then change this oil filter. Replace a bit of oil, but very little. It's an imperative step!
  • Remove all the plugs found around the turbocharger of the famous Hyundai Kona.
  • Check that there are no foreign bodies in the casings, because it can be a source of malfunction.
  • Remove the ducts as well as all of the screws and the nuts that will hold this turbocharger.
  • Remove the turbocharger in place in the Hyundai Kona.
  • Fit the brand new turbocharger, checking that the locations are completely in tune
  • Refit the oil return pipe
  • Fit all the necessary screws and nuts
  • Fill the turbocharger with the oil supplied with the turbo
  • Operate the turbine with your hands to operate the turbocharger.
  • Connect all of the elements to the turbocharger of your Hyundai Kona.
  • Once all the components are fitted, you can switch on the engine block and let it run for around ten minutes.

Once the assembly is installed and the car has been running for some time, it is possible to take a ride in the Hyundai Kona so as to verify that the assembly turns properly. It is also advisable to check the amount of oil but also water regularly for 15 days. Write a comment in case this tutorial has been useful. Good road !