Nowadays we find the turbos in most cars in circulation, whether for engines essences ou Diesel. Just before starting the DIY you will of course have to be convinced that the problem arises from the turbo of the famous hyundai lantra. But if you are on this page, it means that you probably know the cause.
How to change the turbo of your hyundai lantra
Depending on the turbo to be positioned, methods may vary very slightly. When you get a turbo, the product will usually be sold with assembly instructions. The ideal is therefore to follow it point by point. That said, if you have still not bought the product, find out how to replace a turbo in the hyundai lantra. Thereafter you will understand what abilities are needed. Just before you start, you must have all of the tools adequate. You will need an oil container, a set of ratchet wrenches, flat pliers, allen and flat wrenches. Often, turbos will be delivered with a mounting kit including some jointsFew studs but also a little oil. It is still advisable to go to a mechanic because working from a pit is much more convenient to do this kind of manipulation. In addition, the turbo remains a rather sensitive constituent on this hyundai lantra. You should know that the technique is not really complex, we still advise you to go to a technician.
- Drain the engine block then replace this oil filter. Replace a little oil, without putting too much. This is a necessary procedure!
- Remove all the plugs found on the turbo of this hyundai lantra.
- Examine that there are no residues on the casings, since this is undoubtedly a source of concern.
- Remove the conduits but also all of the screws and then the nuts that will hold this turbo.
- Remove the faulty turbo from the hyundai lantra.
- Reassemble the famous turbo, checking that the seals match completely
- Replace the oil return pipe
- Install the required screws and nuts
- Fill the turbo with oil from your syringe
- Operate the turbine by hand to operate the turbo.
- Assemble all the turbo connections of this hyundai lantra.
- Once the parts turn out to be fitted, you can turn on the engine block and let it run for a few minutes.
Now that everything is in order and that the engine has been running for about ten minutes, it is possible to walk around with the hyundai lantra in order to check that the assembly is turning properly. It is also advisable to check the amount of oil but also water regularly in the weeks that follow. Post a comment in case our tutorial helped you. Good walk !