Nowadays you can find the turbos on a lot of cars on the market, whether it's engines essences ou Diesel. Before starting DIY you will obviously have to be sure that the malfunction is from the turbo of your hyundai matrix. However if you are reading to us, it means that you probably know the cause.
How to change the turbo of your hyundai matrix
Depending on the turbo to be presented, methods may change a bit. In the event that you obtain a turbocharger, the latter will generally be delivered with an assembly note. So the best thing to do is to follow it to the letter. However, in the event that you have not yet made the purchase, find out the main lines to replace a turbo compressor on a hyundai matrix. Thereafter you will know if you are able or not. Before you start, make sure you have all of the tools adequate. You will use a receptacle for engine oil, a set of ratchet wrenches, your pliers, allen and flat wrenches. Typically, turbochargers will be sold with a batch of utensils including joints, studs and a portion oil. It is still advisable to go see a pro since tinkering from a pit is much more practical to do this work. Furthermore, the turbocharger remains an extremely delicate component on the hyundai matrix. Even if the technique is not very complicated, we still advise you to go to a mechanic.
- Change the engine oil then replace the oil filter. Add a little oil, but very little. It is an essential phase!
- Remove all the plugs that there are at the turbocharger of this hyundai matrix.
- Check that there are no residues inside the casings, as this can be a source of malfunction.
- Remove the ducts with all the screws but also the nuts which allow the turbocharger to be supported.
- Remove the failed turbocharger from the hyundai matrix.
- Install the famous turbocharger, checking that the seals fit perfectly
- Replace the oil return pipe
- Replace each of the screws and nuts you removed
- Fill the turbocharger with oil from your syringe
- Start the turbine manually so that the turbocharger turns.
- Connect all the connections to the turbocharger of your hyundai matrix.
- Once each of the parts turns out to be in place, you need to start the engine and run it for a few minutes.
Now that everything is in place but also that the car has been running for at least 5 minutes, it is necessary to drive with the hyundai matrix in order to check that everything is working properly. We also advise you to watch the oil level but also the water level quite often in the weeks that follow. Write a comment in case this tutorial was useful to you. Enjoy the road!