Today we find these turbos on a lot of vehicles in circulation, whether for engines essences ou Diesel. Before starting the DIY you will obviously have to be convinced that the malfunction comes from the turbo of your Hyundai Pony. But since you are on this page, it means you most likely know the reason.
How to change the turbo of your Hyundai Pony
Depending on the turbo to be installed, some of the procedures may vary slightly. When you get a turbo it will be systematically delivered with an assembly note. The best is therefore that you read it. But if you have not bought the product, discover the main axes to replace a turbo compressor for this Hyundai Pony. Therefore you will understand if you have the required skills. Just before you start, make sure you have all of the tools required. You will need an oil bucket, a bunch of ratchet wrenches, your flat pliers, your allen and flat wrenches. Usually, the turbos will be delivered with their mounting kit which contains joints, studs and a little oil. We still suggest that you go see a professional simply because tinkering with a pit is even easier to carry out the procedures. What is more, the turbo remains a particularly delicate constituent for the Hyundai Pony. Taking into account that the handling is not very complex, we still advise you to go to a professional.
- Change the engine oil then replace your oil filter. Replace a bit of oil, but not too much. This is an inevitable manipulation!
- Remove all the plugs found around the turbo of the famous Hyundai Pony.
- Check that there are no desirable non-elements in the casings, because this is undoubtedly a source of malfunction.
- Remove the conduits but also each of the screws and then the nuts which support your turbo.
- Remove the faulty turbo from this Hyundai Pony.
- Refit the all-new turbo, checking that the seals stick precisely
- Fit the oil return pipe
- Install all the necessary screws and nuts
- Fill the turbo with the supplied oil
- Operate the turbine with your hands to activate the turbo.
- Refit all of the components to the turbo of this Hyundai Pony.
- Once all the components turn out to be assembled, you will be able to start the engine and let it run for 5 to 10 minutes.
Now that the assembly is installed but also that the engine has been running for a few minutes, it is necessary to drive with this Hyundai Pony to check that the assembly works well. It is also advisable to check the amount of oil but also water regularly in the weeks that follow. Write a comment if our tutorial ever helped you. Enjoy the road!