Now we can find turbos in most automobiles on the market, whether in engines essences ou Diesel. Before starting the DIY it is of course necessary to be certain that the problem arises from the turbo of this Hyundai Portico. But since you're reading this article, it means you probably know the cause.change-turbo-Hyundai-Portico

How to change the turbo of your Hyundai Portico

Depending on the turbo to be installed, some of the processes can fluctuate a bit. When you buy a turbo it is systematically delivered with an assembly manual. It is best to follow it point by point. That said, if you have not yet made the purchase, discover the main lines to change a turbo on a Hyundai Portico. Then you will understand if you have the skills. Before you begin, you must have all of the tools required. You will have the utility of your receptacle for engine oil, a set of ratchet wrenches, flat pliers, allen keys as well as flat. Typically, these turbos will be sold with a mounting kit that contains a few jointsFew studs but also a dose oil. We still advise you to have an audit done by a professional simply because working with a pit is much easier for these jobs. What is more, the turbo remains a super fragile element in this Hyundai Portico. Even if the technique is not extremely complex, it is still advisable to go to a professional.

  • Drain the engine block then change your oil filter. Put a bit of oil, but very little. It is an imperative manipulation!
  • Remove all the plugs from the turbo of this Hyundai Portico.
  • Check that there are no residues in the casings, since this is undoubtedly a source of malfunction.
  • Remove the conduits but also all of the screws and then the nuts that will support your turbo.
  • Remove the failed turbo from the Hyundai Portico.
  • Reassemble the new turbo, checking that the locations fully stick
  • Refit the oil return pipe
  • Fit all the screws and nuts you removed
  • Fill the turbo with the supplied oil
  • Rotate the turbine manually to rotate the turbo.
  • Connect all of the elements to the turbo of this Hyundai Portico.
  • As soon as all the parts are assembled, you will be able to start the engine block and let it run for a few minutes.

Once the turbo is in place but also that the car has been running for a few minutes, you will be able to drive in the Hyundai Portico in order to check that the assembly turns correctly. We also advise you to check the oil and water level regularly in the weeks that follow. Leave a comment if you have ever used this guide. Enjoy again!