Now we find these turbos on many cars from the last 20 years, as many on systems essences ou Diesel. Before starting these manipulations it is obviously necessary to be certain that the problem comes from the turbo of your hyundai santa fe. But if you are reading this article, it means you probably know the reason.
How to change the turbo of your Hyundai Santa Fe
Depending on the turbo to install, some of the handling may fluctuate slightly. When you buy a turbocharger it will usually be delivered with an instruction manual. The best is therefore that you follow it to the letter. But in the event that you still have not made the purchase, we offer you the outline to replace a turbo in the hyundai santa fe. This way you will know if you have the required skills. Before you start, make sure you have all the tools indispensable. You will have the utility of your bucket for engine oil, a set of ratchets, a pliers, your allen and flat wrenches. Usually, these turbos are supplied with their mounting kit which contains a few jointsFew studs as well as a portion oil. We still advise you to have a specialist checked because working with a pit remains much easier to carry out these operations. In addition, the turbocharger is a very delicate element for this hyundai santa fe. Even if the handling is not particularly complicated, we still advise you to go to a garage.
- Drain the engine then replace the oil filter. Add a little oil, in a small quantity. This is an essential phase!
- Remove the various plugs that are on the turbocharger of your hyundai santa fe.
- Watch that no undesirable elements are found in the housings, since this can be a source of malfunction.
- Remove the ducts and of course all the screws and then the nuts which hold the turbocharger.
- Remove the existing turbocharger from your hyundai santa fe.
- Reassemble the new turbocharger, checking that the locations correspond perfectly
- Replace the oil return pipe
- Replace all the screws and nuts that you removed
- Fill the turbocharger with oil from your syringe
- Start the turbine manually so as to activate the turbocharger.
- Assemble the different elements to the turbocharger of this Hyundai Santa Fe.
- As soon as all the components are in place, you can start the engine and let it run for ten minutes.
Now that the assembly is installed but also that the engine has been running for 5 to 10 minutes, you will be able to take your hyundai santa fe for a ride to see that the assembly works properly. We also recommend that you check the oil and water level quite often in the following weeks. Write a comment if this tutorial was useful. See you soon !