Today we can find the turbos on a lot of cars from the last 20 years, as many on engines essences ou Diesel. Before starting these manipulations we will obviously have to be convinced that the malfunction comes from the turbo of the famous Hyundai Satellite. However, if you are on this page, it shows that you certainly know the reason.change-turbo-Hyundai-Satellite

How to change the turbo of your Hyundai Satellite

Compared to the turbo to be positioned, the processes will be able to vary a bit. When you buy a turbo it will generally be sold with a manual. The best thing to do is therefore to follow it point by point. That said, if you have still not purchased the product, below are the main lines for changing a turbo compressor on a Hyundai Satellite. Then you will find out if you have the required skills. Before you start, make sure you have all of the tools adequate. You are going to have the utility of an oil container, a set of ratchet wrenches, flat pliers, allen wrenches as well as flat wrenches. Usually, the turbos are sold with their tool kit which includes some jointsFew studs but also a little oil. We still suggest you go to a garage because tinkering with a pit is much more convenient to do this kind of manipulation. What is more, the turbo remains a really fragile constituent for this Hyundai Satellite. You should know that the operation is not particularly laborious, we still advise you to go to a mechanic.

  • Drain the engine and change your oil filter. Add a little oil, in small quantities. It is an essential procedure!
  • Remove all the plugs present at the turbo of the Hyundai Satellite.
  • Examine that there are no foreign bodies inside the casings, since this is a source of concern.
  • Remove the conduits and of course each of the screws and then the nuts which support your turbo.
  • Remove the faulty turbo from the Hyundai Satellite.
  • Fit the new turbo, checking that the locations correspond exactly
  • Refit the oil return pipe
  • Install each of the screws and nuts you removed
  • Fill the turbo with the supplied oil
  • Manually rotate the turbine to activate the turbo.
  • Reconnect all the elements to the turbo of the Hyundai Satellite.
  • Now that when each of the parts happen to be in place, you will be able to start the engine and let it run for a few minutes.

Now that the assembly is installed and the car has been running for at least 5 minutes, it is possible to take a ride with the Hyundai Satellite to see that the assembly works properly. We also advise you to check the oil level but also the water level regularly for 15 days. Write a comment if this guide has ever been helpful. Good road !