Nowadays we find these turbos in a large part of the vehicles in circulation, whether in engines essences ou Diesel. Before starting these operations, it is of course necessary to be sure that the trouble comes from the turbo of your Hyundai Scoupe. But seeing as you are reading this article, it probably means you know the reason.
How to change the turbo of your Hyundai Scoupe
Compared to the turbo to be positioned, some of the procedures will be able to fluctuate a bit. If you buy a turbocharger, the product will always be supplied with assembly instructions. The best thing you can do is follow it to the letter. On the other hand, if you have not made the purchase, here are the steps to follow in order to replace a turbo compressor for this Hyundai Scoupe. Therefore you will understand if you have the required skills. Before you start, be sure to have all the tools indispensable. You will need a container for the oil, a set of ratchets, your flat pliers, allen wrenches as well as flats. In general, these turbochargers will be sold with their mounting kit which contains a few jointsFew studs and a portion oil. We still advise you to go to a mechanic since working with a pit remains much easier to do these operations. Moreover, the turbocharger happens to be a really sensitive component in this Hyundai Scoupe. You should know that the operation is not really complicated, we still advise you to go to a garage.
- Drain the engine block then replace this oil filter. Add a little oil, without putting too much. This is a necessary procedure!
- Remove all the caps that there are around the turbocharger of this Hyundai Scoupe.
- Check that no foreign bodies are found in the casings, since this is undoubtedly a cause of the problem.
- Remove the ducts and of course all the screws but also the nuts which hold this turbocharger.
- Remove the turbocharger in place in the Hyundai Scoupe.
- Install the new turbocharger, checking that the locations are completely suitable
- Install the oil return pipe
- Replace all the required screws and nuts
- Fill the turbocharger with the oil supplied with the turbo
- Operate the turbine by hand to operate the turbocharger.
- Refit all the components to the turbocharger of this Hyundai Scoupe.
- Once all of the parts are in place, you can turn on the engine block and run it for about ten minutes.
Now that the turbo is in place and the engine has been running for a while, you can drive the Hyundai Scoupe to see that the assembly is running correctly. We advise you at the same time to check the quantity of oil and water regularly in the following weeks. Leave a comment if our text was ever useful. Enjoy again!