Today we can find these turbos on many new vehicles, as many on systems essences ou Diesel. Just before starting the DIY you will obviously have to be convinced that the malfunction comes from the turbo of the famous hyundai journey. Having said that, since you've come this far, you most likely know the source.change-turbo-hyundai-ride

How to change the turbo of your hyundai journey

Compared to the turbo to install, methods may change slightly. When you buy a turbo it is usually sold with an achievement note. The ideal is how you read it. However, if you have not yet purchased the product, you will find below the steps to follow in order to replace a turbo in a hyundai journey. Therefore you will know what capacities are needed. Before starting, you must have all of the tools adequate. You are going to need a bucket for the oil, a bunch of ratchets, a pair of pliers, allen wrenches as well as flats. Very often, these turbos will be supplied with their assembly kit which includes a few jointsFew studs as well as a little oil. It is nevertheless advisable to go to a garage because working from a pit turns out to be even easier to do this kind of process. What's more, the turbo is a particularly fragile element in a hyundai journey. Even though the handling is not really complicated, we still advise you to go to a specialist.

  • Drain the engine and replace this oil filter. Replace a little oil, but not too much. It is an essential procedure!
  • Remove all of the plugs present on the turbo of the hyundai journey.
  • Check that there are no foreign bodies within the housings, as this may be the cause of a malfunction.
  • Remove the conduits as well as all the screws and nuts which hold this turbo.
  • Remove the existing turbo from your hyundai ride.
  • Install the new turbo, checking that the locations fully stick
  • Replace the oil return pipe
  • Replace all the required screws and nuts
  • Fill the turbo with the oil provided
  • Start the turbine manually so as to activate the turbo.
  • Connect all the connections to the turbo of this hyundai route.
  • Once all the parts are in place, you should start the engine and let it run for 5 to 10 minutes.

Now that everything is in order and of course the car has been running for at least 5 minutes, you can take your hyundai journey for a ride to check that the assembly is working properly. At the same time, we advise you to check the oil and water level quite often in the following weeks. Leave a comment if our file has helped you. Enjoy the road!