Nowadays we find the turbos on a lot of cars on the market, whether in engines essences ou Diesel. Just before you start DIY, you will of course have to be sure that the hassle comes from the turbo of your Hyundai Veloster. But since you've come this far, it shows that you most likely know the source.
How to change the turbo of your Hyundai Veloster
Compared to the turbo to be installed, some of the processes may fluctuate slightly. As soon as you get a turbo it will usually be sold with an assembly manual. The ideal is therefore to follow it point by point. However, in case you have not yet purchased the product, here are the manipulations to do in order to change a turbo in this Hyundai Veloster. In fact you will know what capabilities are needed. Before starting, make sure you have all of the tools required. You are going to use a bucket for engine oil, a set of ratchet wrenches, flat pliers, your allen and flat wrenches. Typically, turbos are sold with a mounting kit that contains a few jointsFew studs but also a syringe oil. However, we advise you to have it checked by a mechanic since working with a pit remains much more convenient for handling. Furthermore, the turbo happens to be a rather delicate constituent in a Hyundai Veloster. You should know that handling is not really difficult, it is still recommended to go to a garage.
- Change the engine oil and then change your oil filter. Add a little oil, without putting too much. This is an inevitable step!
- Remove all the plugs there are on the turbo of this Hyundai Veloster.
- Examine that there are no foreign bodies inside the casings, since this is undoubtedly a source of malfunction.
- Remove the conduits and of course all the screws and nuts that will maintain your turbo.
- Remove the faulty turbo from your Hyundai Veloster.
- Set up the famous turbo, checking that the locations completely match
- Replace the oil return pipe
- Reassemble all the required screws and nuts
- Fill the turbo with oil from your syringe
- Start the turbine by hand in order to activate the turbo.
- Assemble all the turbo connections of this Hyundai Veloster.
- Now that when all of the components have been installed, you need to start the engine and let it run for a few minutes.
Once everything is installed and screwed but also that the engine has been running for ten minutes, you can walk around in your Hyundai Veloster to examine that the assembly is working properly. We also advise you to check the oil level but also the water level regularly in the coming days. Post a comment in case this text served you. Good walk !