Now we find turbos in most cars in circulation, whether for systems essences ou Diesel. Just before starting this task you will obviously have to be certain that the problem comes from the turbo of your Iveco Daily Chassis Cab. However, since you have come this far, it means that you certainly know the cause.change-turbo-Iveco-Daily-Chassis-Cab

How to change the turbo of your Iveco Daily Chassis Cab

Depending on the turbo to be presented, the processes may vary very slightly. When you buy a turbocharger, the product will usually be supplied with an assembly manual. So the best thing to do is read it. However, in the event that you have not yet made the purchase, here are the steps to follow so as to replace a turbo compressor for this Iveco Daily Chassis Cab. This way you will know if you are capable of it or not. Just before you start, make sure you have all of the tools indispensable. You will need a bucket for engine oil, a set of ratchet wrenches, flat pliers, allen wrenches as well as flat wrenches. In general, turbochargers will be provided with a mounting kit including some jointsFew studs as well as a syringe oil. However, we advise you to go see a professional because working from a pit remains much more practical for handling. And of course, the turbocharger happens to be a fairly fragile element for this Iveco Daily Chassis Cab. Even if the operation is not particularly laborious, we still advise you to go to a garage.

  • Drain the engine block then replace this oil filter. Add a little oil, but very little. This is a necessary phase!
  • Remove all the plugs around the turbocharger of the famous Iveco Daily Chassis Cab.
  • Check that there are no residues in the casings, since this is undoubtedly a source of concern.
  • Remove the conduits as well as all the screws and nuts which will support this turbocharger.
  • Remove the existing turbocharger from your Iveco Daily Chassis Cab.
  • Install the famous turbocharger, checking that the seals are completely suitable
  • Refit the oil return pipe
  • Replace the set of screws and nuts you removed
  • Fill the turbocharger using the oil supplied with the turbo
  • Rotate the turbine by hand so that the turbocharger is actuated.
  • Connect all the components to the turbocharger of your Iveco Daily Chassis Cab.
  • As soon as all the parts are fitted, you need to switch on the engine block and let it run for around ten minutes.

Once the turbo is in place but also that the engine has been running for a few minutes, you can walk around with your Iveco Daily Chassis Cab to check that the assembly is turning properly. We also advise you to check the oil and water level regularly for 15 days. Leave a comment if you find this guide useful. Enjoy again!