Now we find turbos in a large part of the cars in circulation, as much on systems essences ou Diesel. Before starting this task it will of course be necessary to be sure that the problem comes from the turbo of this Iveco Daily Van. Having said that, since you are reading from us, you probably know the source.
How to change the turbo of your Iveco Daily Van
Depending on the turbo to be implemented, some of the methods may fluctuate slightly. In case you buy a turbocharger it is always sold in company of a note of realization. The ideal is as you read it. But in the event that you have still not made the purchase, discover the main lines so as to change a turbo in the Iveco Daily Van. Then you will know if you have the skills. Just before you start, make sure you have all of the tools required. You will use a bucket for oil, a set of ratchet wrenches, your pliers, allen and flat wrenches. Often, turbochargers come with a tool kit that contains a few jointsFew studs but also a portion oil. We still suggest you go to a specialist because tinkering with a pit remains much easier for this kind of work. And of course, the turbocharger happens to be a rather fragile element on this Iveco Daily Van. Even if the handling is not extremely complex, we still advise you to go to a professional.
- Change the engine oil and change your oil filter. Replace a little oil, but very little. This is an inevitable step!
- Remove all the plugs around the turbocharger of this Iveco Daily Van.
- Check that there is no residue in the casings, since this is sometimes a source of problem.
- Remove the ducts and of course all of the screws and the nuts that will hold your turbocharger.
- Remove the existing turbocharger from this Iveco Daily Van.
- Set up the famous turbocharger, checking that the locations correspond completely
- Replace the oil return pipe
- Fit the necessary screws and nuts
- Fill the turbocharger with oil from your syringe
- Rotate the turbine manually to activate the turbocharger.
- Reattach all the connections to the turbocharger of your Iveco Daily Van.
- Once the components are installed, you can start the engine and let it run for 5 to 10 minutes.
Now that everything is in place and of course the car has been running for 5 to 10 minutes, it is necessary to walk around behind the wheel of this Iveco Daily Van so that you can see that everything is working properly. It is also advisable to check the oil and water level fairly frequently in the weeks that follow. Post a comment in case this tutorial served you. Enjoy again!