Nowadays we find the turbos on a lot of new cars, as much on engines essences ou Diesel. Before starting DIY, you must of course be convinced that the hassle arises from the turbo of this Iveco Eurocargo. That said, since you are reading from us, it shows that you certainly know the source.change-turbo-Iveco-Eurocargo

How to change the turbo on your Iveco Eurocargo

Depending on the turbo to be positioned, some of the procedures may change very slightly. When you buy a turbocharger, the product will generally be sold together with an assembly manual. The ideal is therefore to follow it point by point. By cons in case you have not made the purchase, discover the steps to follow to be able to replace a turbo compressor on this Iveco Eurocargo. In fact you will know if you have the skills. Just before you start, make sure you have all of the tools adequate. You will need your oil receptacle, a set of ratchet wrenches, flat pliers, your allen and flat wrenches. Most of the time, turbos will be sold with a tool kit that includes joints, studs as well as a portion oil. We still advise you to go to a mechanic because working from a pit turns out to be more convenient to carry out these procedures. What is more, the turbocharger turns out to be a super delicate constituent in an Iveco Eurocargo. You should know that the technique is not really difficult, we still advise you to go to a mechanic.

  • Drain the engine then replace your oil filter. Add a little oil, without putting too much. This is an essential procedure!
  • Remove the various plugs from the Iveco Eurocargo turbocharger.
  • Check that there are no residues inside the casings, since this is sometimes a cause for concern.
  • Remove the conduits but also each of the screws and then the nuts which will maintain your turbocharger.
  • Remove the failed turbocharger from the Iveco Eurocargo.
  • Install the famous turbocharger, checking that the locations stick precisely
  • Install the oil return pipe
  • Fit all necessary screws and nuts
  • Fill the turbocharger with the supplied oil
  • Operate the turbine manually to activate the turbocharger.
  • Connect the different elements to the turbocharger of your Iveco Eurocargo.
  • As soon as all the parts have been fitted, you will be able to start the engine and run it for 5 to 10 minutes.

Now that everything is installed and screwed and of course the car has been running for 5 to 10 minutes, do not hesitate to drive the Iveco Eurocargo to see that everything is working properly. We also advise you to watch the oil level but also the water level quite often in the coming days. Post a comment in case this text helped you. Good road !