Now we can find these turbos on a lot of vehicles from the last 20 years, as much on the systems essences ou Diesel. Before starting this task it is of course necessary to be certain that the malfunction comes from the turbo of this Iveco Minivan. But since you are on this page, it indicates that you likely know the cause.change-turbo-Iveco-Minivan

How to change the turbo of your Iveco Minivan

Depending on the turbo to be positioned, the processes may vary slightly. When you get a turbo the product is systematically sold with an assembly manual. The best is therefore that you follow it to the letter. But in case you have not purchased the product, we offer the main axes so as to change a turbo compressor on this Iveco Minivan. Therefore you will know if you have the skills. Just before you start, make sure you have all of the tools indispensable. You are going to need your bucket for engine oil, a set of ratchet wrenches, flat pliers, allen and flat wrenches. Often, the turbos will be sold with their lot of utensils which includes some jointsFew studs as well as a syringe oil. We still recommend that you go see a pro since working with a pit is much more practical for these procedures. In addition, the turbo remains a very delicate element for an Iveco Minivan. Taking into account that the technique is not extremely complex, we still advise you to go to a mechanic.

  • Drain the engine block then change this oil filter. Add a little oil, but very little. It is an imperative procedure!
  • Place the various plugs on the turbo of the Iveco Minivan.
  • Check that there are no desirable non-elements in the housings, as this is undoubtedly a source of malfunction.
  • Remove the conduits and all the screws and then the nuts which will allow this turbo to hold.
  • Remove the faulty turbo from this Iveco Minivan.
  • Reassemble the new turbo, checking that the seals stick completely
  • Fit the oil return pipe
  • Replace all the necessary screws and nuts
  • Fill the turbo with the oil supplied with the turbo
  • Operate the turbine manually to activate the turbo.
  • Assemble the various turbo connections of this Iveco Minivan.
  • Once all the parts are assembled, you will be able to light the engine block and let it run for 5 to 10 minutes.

Now that the turbo is in place and the engine has been running for about ten minutes, it is necessary to drive with this Iveco Minivan in order to check that the assembly works properly. At the same time, we advise you to check the quantity of oil and water fairly often in the following weeks. Write a comment in case our file has been useful. See you soon !