Nowadays you can find the turbos on a lot of cars in circulation, whether for engines essences ou Diesel. Before you start the work, you must of course be sure that the problem comes from the turbo of the famous Jeep Cherokee. However, since you are on this page, it probably means you know the source.
How to change the turbo of your Cherokee jeep
Compared to the turbo to set up, the handling will be able to change slightly. If you buy a turbocharger, it is usually delivered with an instruction manual. The ideal is therefore that you follow it to the letter. However, if you have not purchased the product, find out what to do to change a turbo compressor in your Jeep Cherokee. Therefore you will know what capacities are needed. Before you start, you must have all the tools required. You will need a bucket for oil, a set of ratchets, your flat pliers, your allen and flat wrenches. In general, these turbochargers will be sold with their set of utensils including joints, studs but also a portion oil. It is still advisable to go to a professional since working with a pit remains much easier to carry out this work. What's more, the turbocharger happens to be a very delicate component for this jeep cherokee. You should know that the technique is not super laborious, we nevertheless advise you to go to a garage.
- Drain the engine and change the oil filter. Put a bit of oil, without putting too much. This is an essential procedure!
- Remove the various plugs present on the turbocharger of the famous Jeep Cherokee.
- Check that there are no undesirable elements in the housings, since this is undoubtedly a source of problem.
- Remove the ducts with all the screws and then the nuts that hold the turbocharger.
- Remove the existing turbocharger from your Jeep Cherokee.
- Reassemble the brand new turbocharger, checking that the seals match perfectly
- Install the oil return pipe
- Fit all the screws and nuts that you removed
- Fill the turbocharger with the supplied oil
- Rotate the turbine by hand so that the turbocharger turns.
- Assemble the various components to the jeep cherokee turbocharger.
- Now that when all the components are assembled, you will be able to start the engine and run it for about ten minutes.
Now that everything is in place, but also that the engine has been running for a while, you can get around behind the wheel of your Jeep Cherokee to check that everything is working correctly. We advise you at the same time to check the oil level but also the water level regularly in the following weeks. Post a comment if our text was useful to you. Good road !