Nowadays you can find the turbos on a lot of new cars, as much on the systems essences ou Diesel. Before you start DIY, you must of course be sure that the problem comes from the turbo in your Jeep Comanche. But since you're reading from us, it shows that you most likely know the reason.change-turbo-Jeep-Comanche

How to change the turbo of your Jeep Comanche

Depending on the turbo to be implemented, the procedures may fluctuate very slightly. When you buy a turbo the product will always be supplied with an assembly note. The best thing to do is to follow it step by step. But in the event that you have not yet made the purchase, we offer the main axes to replace a turbo in a Jeep Comanche. In this way you will understand whether you are capable of it or not. Before you start, make sure you have all of the tools required. You will use your oil container, a set of ratchet wrenches, flat pliers, your allen and flat wrenches. Generally, these turbos will be sold with a lot of utensils which includes some jointsFew studs as well as a portion oil. However, we advise you to go to a garage because working from a pit is even more practical for the procedures. Furthermore, the turbo turns out to be a particularly fragile element in this Jeep Comanche. Even if the technique is not really difficult, we still advise you to go to a mechanic.

  • Drain the engine block then replace the oil filter. Put a little oil, but very little. This is an inevitable manipulation!
  • Remove all the plugs found around the turbo of your Jeep Comanche.
  • Check that there are no desirable non-elements in the casings, since this is undoubtedly a source of concern.
  • Remove the conduits but also all the screws and then the nuts which hold the turbo.
  • Remove the existing turbo from this Jeep Comanche.
  • Fit the new turbo, checking that the joints fit exactly
  • Replace the oil return pipe
  • Replace all the necessary screws and nuts
  • Fill the turbo using the oil supplied with the turbo
  • Turn the turbine by hand so that the turbo operates.
  • Reconnect all the components to the turbo of your Jeep Comanche.
  • Now that when all of the components are in place, you will turn on the engine block and operate it for ten minutes.

Once everything is in order and the engine has been running for a few minutes, it is possible to walk around with this Jeep Comanche in order to verify that the assembly is working well. We also advise you to check the amount of oil and water regularly in the coming days. Write a comment if this file has ever been useful. Enjoy again!