Now we find these turbos on many cars on the market, whether it's systems essences ou Diesel. Before starting this task it is of course necessary to be convinced that the concern comes from the turbo of the famous Jeep Wagoneer. However, since you are reading us, it means that you most likely know the reason.change-turbo-Jeep-Wagoneer

How to change the turbo of your Jeep Wagoneer

Compared to the turbo to set up, some of the handling will be able to change slightly. When you purchase a turbocharger the product will usually be supplied with assembly instructions. The ideal is how you read it. That said, in the event that you have not made the purchase, you will find below the steps to follow to change a turbo compressor on a Jeep Wagoneer. This way you will know if you are capable of it or not. Just before you start, make sure you have all of the tools required. You are going to need your container for the oil, a bunch of ratchets, your pliers, allen and open end wrenches. Often, turbos will be supplied with a tool kit that contains joints, studs but also a dose oil. It is still advisable to go see a pro since tinkering from a pit is even more practical to carry out the work. And of course, the turbocharger turns out to be a really sensitive component on a Jeep Wagoneer. Even if the technique is not particularly laborious, we still advise you to go to a specialist.

  • Drain the engine then change the oil filter. Replace a sprig of oil, without putting too much. This is an essential phase!
  • Remove all the plugs that are found around the turbocharger of the Jeep Wagoneer.
  • Examine that there are no undesirable elements inside the housings, because this is a cause of malfunction.
  • Remove the ducts and of course all the screws and then the nuts which will support the turbocharger.
  • Remove the existing turbocharger from your Jeep Wagoneer.
  • Fit the brand new turbocharger, checking that the locations match precisely
  • Fit the oil return pipe
  • Replace all the screws and nuts you removed
  • Fill the turbocharger with oil from your syringe
  • Start the turbine with your hands so as to activate the turbocharger.
  • Reconnect all the connections to the Jeep Wagoneer turbocharger.
  • Once all the parts are in place, you will start the engine and let it run for a few minutes.

Once everything is in order, but also after the car has been running for about ten minutes, you can take your Jeep Wagoneer for a ride to check that the assembly is working properly. At the same time, we advise you to check the oil level but also the water level quite often in the following weeks. Leave a comment if this guide was helpful. Good road !