Today we find turbos in a large part of the vehicles on the market, be it systems essences ou Diesel. Before starting the work you will of course have to be certain that the problem comes from the turbo of this Jeep Willys. But since you are reading this article, it is because you certainly know the reason.change-turbo-Jeep-Willys

How to change the turbo on your Willys Jeep

Depending on the turbo to be installed, manipulations may change a bit. When you buy a turbocharger it always comes with an assembly note. So the best thing to do is to follow it step by step. That said, in the event that you have still not made the purchase, we suggest the operations to be done in order to be able to replace a turbo on the Jeep Willys. This way you will know if you are capable of it or not. Before you start, make sure you have all of the tools indispensable. You will need your bucket for oil, a set of ratchet wrenches, a pair of pliers, your allen and flat wrenches. Usually, these turbochargers will be sold with a mounting kit including some jointsFew studs and a syringe oil. However, we suggest that you have a pro check because working with a pit is much more practical for the work. What is more, the turbocharger is a fairly delicate constituent for the Jeep Willys. Taking into account that the operation is not downright complicated, we advise you to go to a specialist.

  • Drain the engine block then replace the oil filter. Put a bit of oil back, but not too much. This is an imperative step!
  • Remove all the plugs found around the turbocharger of your Jeep Willys.
  • Examine that there are no desirable non-elements inside the casings, because that is undoubtedly a source of problem.
  • Remove the conduits but also all of the screws and then the nuts which will hold the turbocharger.
  • Remove the turbocharger in place in the Jeep Willys.
  • Reassemble the brand new turbocharger, checking that the locations stick completely
  • Refit the oil return pipe
  • Reinstall all the required screws and nuts
  • Fill the turbocharger with the oil supplied with the turbo
  • Rotate the turbine with your hands to rotate the turbocharger.
  • Reattach all components to the Jeep Willys turbocharger.
  • Once all the parts have been fitted, you can switch on the engine block and let it run for a few minutes.

Now that everything is installed and screwed, but also that the car has been running for 5 to 10 minutes, it is possible to walk around with the Jeep Willys so as to see that everything is going well. It is advisable at the same time to check the level of oil but also of water quite frequently for 15 days. Write a comment if this file helped you. Good walk !