Nowadays you can find turbos on a lot of cars in circulation, whether it's systems essences ou Diesel. Before starting the DIY you must of course be sure that the malfunction comes from the turbo of the famous Kia Carnival 2. However, since you are reading this article, you certainly know the source.change-turbo-Kia-Carnival-2

How to change the turbo of your Kia Carnival 2

Depending on the turbo to set up, the procedures may vary very slightly. When you buy a turbocharger, the product will always be delivered with an instruction manual. The ideal is therefore to follow it point by point. But if you have not yet made the purchase, here are the steps to follow in order to change a turbo compressor in the Kia Carnival 2. Therefore you will know if you have the skills. Before you start, be careful to have all the tools adequate. You will need your container for the oil, a set of ratchets, your flat pliers, allen wrenches as well as flats. Most of the time, these turbos will be supplied with their tool kit which contains a few jointsFew studs but also a portion oil. We still recommend that you go to a mechanic quite simply because working from a pit turns out to be much easier for this kind of manipulation. And of course, the turbocharger turns out to be a rather delicate element for the Kia Carnival 2. Bearing in mind that handling is not particularly complex, we still advise you to go to a garage.

  • Drain the engine then change your oil filter. Replace a little oil, but not too much. It is a necessary step!
  • Remove the various plugs present on the turbocharger of the Kia Carnival 2.
  • Check that there are no undesirable elements inside the housings, as this is sometimes a cause of problem.
  • Remove the ducts as well as each of the screws and then the nuts which support your turbocharger.
  • Remove the turbocharger in place in this Kia Carnival 2.
  • Reassemble the famous turbocharger by checking that the locations are perfectly suitable
  • Replace the oil return pipe
  • Reassemble each of the required screws and nuts
  • Fill the turbocharger using the oil supplied with the turbo
  • Operate the turbine by hand to operate the turbocharger.
  • Reconnect the various connections to the turbocharger of this Kia Carnival 2.
  • As soon as each of the components turns out to be fitted, you will be able to start the engine and run it for a few minutes.

Now that the assembly is installed but also that the engine has been running for a while, you must walk with this Kia Carnival 2 in order to see that the assembly works well. We also recommend that you check the amount of oil and water quite frequently in the coming days. Post a comment if our tutorial was useful to you. Enjoy again!