Now we find turbos on a lot of cars from the last 20 years, whether it's systems essences ou Diesel. Before you start this task you will obviously have to be sure that the hassle occurs from the turbo of this Kia Carnival. However, since you are reading to us, this reveals that you probably know the cause.
How to change the turbo of your Kia Carnival
Depending on the turbo to be installed, the procedures may fluctuate slightly. In case you buy a turbocharger it is always sold with an assembly manual. It is best that you follow it to the letter. But if you have not yet made the purchase, here are the steps to take in order to replace a turbo compressor in the Kia Carnival. In this way you will understand whether you are capable of it or not. Just before you start, make sure you have all of the tools adequate. You are going to need a container for engine oil, a bunch of ratchet wrenches, flat pliers, allen keys as well as flat wrenches. Usually these turbochargers will come with a mounting kit that contains a few jointsFew studs but also a little oil. However, we suggest that you go to a mechanic since tinkering with a pit turns out to be even easier for the procedures. And of course, the turbocharger happens to be a very sensitive component for this Kia Carnival. Even if the handling is not very difficult, it is still advisable to go to a mechanic.
- Drain the engine, then replace the oil filter. Replace a little oil, without putting too much. This is a necessary phase!
- Remove the various plugs present on the turbocharger of the famous Kia Carnival.
- Check that there is no residue inside the housings, since this is a source of malfunction.
- Remove the conduits but also all the screws but also the nuts which allow the turbocharger to be held.
- Remove the existing turbocharger from your Kia Carnival.
- Reassemble the new turbocharger, checking that the locations match perfectly
- Replace the oil return pipe
- Fit all required screws and nuts
- Fill the turbocharger with oil from your syringe
- Start the turbine by hand in order to activate the turbocharger.
- Connect the various components to the turbocharger of your Kia Carnival.
- Once all the components are installed, you must start the engine and let it run for a few minutes.
Once everything is in order and of course the car has been running for 5 to 10 minutes, you can drive with your Kia Carnival to check that everything is working well. It is also advisable to check the oil and water level regularly in the weeks that follow. Write a comment if our tutorial was useful to you. See you soon !