Now we can find these turbos on a lot of automobiles from the last 20 years, whether it's for systems essences ou Diesel. Before you start these manipulations, it is obviously necessary to be certain that the problem comes from the turbo of your Kia Cee D. However, given that you have arrived here, this shows that you probably know the reason.
How to change the turbo on your Kia Cee D
Depending on the turbo to be installed, some of the manipulations may fluctuate very slightly. As soon as you buy a turbo, the product will be systematically delivered in the company of an implementation manual. It is best to follow it point by point. On the other hand if you never made the purchase, we suggest the steps to follow in order to replace a turbo compressor for this Kia Cee D. Therefore you will understand if you have the skills. Just before you start, make sure you have all of the tools indispensable. You're going to need an oil bucket, a bunch of ratchet wrenches, your flat pliers, your allen and flat wrenches. In general, turbochargers are found to be supplied with a tool kit which includes joints, studs as well as a dose oil. However, we advise you to go to a pro since working from a pit turns out to be much easier to carry out this kind of manipulation. What is more, the turbo is an extremely delicate component in the Kia Cee D. Even if the operation is not extremely difficult, it is still advisable to go to a garage.
- Change the engine oil then replace your oil filter. Replace a little oil, without putting too much. It's an inevitable phase!
- Remove the various plugs present on the Kia Cee D's turbo.
- Watch that there are no residues inside the casings, because this is sometimes a source of concern.
- Remove the conduits but also all the screws and then the nuts which will hold your turbo.
- Remove the faulty turbo from this Kia Cee D.
- Reassemble the famous turbo, checking that the locations match exactly
- Fit the oil return pipe
- Install all of the screws and nuts you removed
- Fill the turbo using the oil provided
- Rotate the turbine with your hands to rotate the turbo.
- Reattach the various connections to the Kia Cee D's turbo.
- As soon as all the components are installed, you will be able to start the engine and let it run for 5 to 10 minutes.
Now that everything is installed and screwed and of course the car has been running for a few minutes, it is possible to walk around with this Kia Cee D so as to check that everything is going well. At the same time, we advise you to check the oil and water level regularly in the weeks that follow. Write a comment if you ever found this tutorial useful. Good road !