Now we can find these turbos in most new vehicles, whether for systems essences ou Diesel. Before you start this task, you will of course have to be sure that the problem is with the turbo in this Kia Clarus. However, if you are reading us now, it shows that you probably know the cause.
How to change the turbo in your Kia Clarus
Depending on the turbo to be positioned, the procedures may vary very slightly. As soon as you buy a turbo it is usually provided with an achievement note. The best is therefore to follow it point by point. However if you have not yet made the purchase, discover the main axes so as to change a turbo on this Kia Clarus. So you will know whether you are capable of it or not. Before starting, make sure you have all of the tools required. You will have the use of your receptacle for the oil, a set of ratchets, your flat pliers, allen and flat wrenches. Usually, turbochargers will come with their tool kit which includes joints, studs but also a little oil. It is still advisable to go see a specialist because working with a pit is easier to do this kind of manipulation. What's more, the turbo is a super sensitive component on a Kia Clarus. Even though the handling is not extremely complex, we nevertheless advise you to go to a technician.
- Drain the engine block and change the oil filter. Add a little oil, without adding too much. This is an inevitable procedure!
- Remove all of the plugs present on the turbo of the Kia Clarus.
- Check that no undesirable elements are found in the casings, since this is undoubtedly the source of the problem.
- Remove the ducts and all the screws, but also the nuts that support the turbo.
- Remove the turbo in place in your Kia Clarus.
- Install the famous turbo, checking that the locations are completely in tune
- Replace the oil return pipe
- Install all the screws and nuts you removed
- Fill the turbo with the oil supplied with the turbo
- Rotate the turbine by hand to activate the turbo.
- Connect all the components to the turbo of your Kia Clarus.
- Once all the components are found to be installed, you must start the engine block and let it run for a few minutes.
Now that everything is in order and the car has been running for about ten minutes, it is possible to drive your Kia Clarus to check that everything is running correctly. It is also advisable to check the quantity of oil but also of water regularly for 15 days. Post a comment if our file was useful to you. Enjoy the road!