Now we find the turbos on a lot of cars from the last 20 years, as many on systems essences ou Diesel. Before starting DIY, you must naturally be certain that the problem comes from the turbo of the famous Kia Pride Kombi. That said, if you've gotten this far, it shows that you certainly know the reason.change-turbo-Kia-Pride-Kombi

How to change the turbo of your Kia Pride Kombi

Depending on the turbo to be implemented, the procedures will be able to change a little. When you get a turbo the product will always be delivered with a manual. It is best that you follow it to the letter. However if you have not purchased the product, we suggest the steps to follow in order to replace a turbo in this Kia Pride Kombi. Therefore you will know if you have the required skills. Just before you start, make sure you have all of the tools required. You're going to need your bucket for engine oil, a bunch of ratchet wrenches, your flat pliers, your allen and flat wrenches. Often these turbochargers will be delivered with their mounting kit which includes joints, studs and a dose oil. We still advise you to go to a mechanic since working with a pit is easier for this kind of work. In addition, the turbo is a particularly sensitive element in this Kia Pride Kombi. Even if the handling is not very complex, we advise you to go to a specialist.

  • Change the engine oil then replace the oil filter. Replace a little oil, without putting too much. This is a necessary procedure!
  • Remove all the plugs found around the turbo of the famous Kia Pride Kombi.
  • Check that there are no residues in the housings, since this can be a cause of malfunction.
  • Remove the conduits with each of the screws but also the nuts which allow the turbo to be held.
  • Place the turbo in place in the Kia Pride Kombi.
  • Reassemble the famous turbo, checking that the joints stick exactly
  • Install the oil return pipe
  • Install each of the necessary screws and nuts
  • Fill the turbo with the oil supplied with the turbo
  • Turn on the turbine manually to activate the turbo.
  • Refit all the elements to the turbo of the Kia Pride Kombi.
  • Once each of the components are installed, you will be able to start the engine and let it run for a few minutes.

Now that everything is in place but also that the car has been running for 5 to 10 minutes, you will be able to take a ride with the Kia Pride Kombi so as to examine that everything is working properly. We also advise you to check the oil and water level often enough for 15 days. Post a comment in case this tutorial was useful to you. Enjoy again!