Now we find turbos in much of the vehicles of the last 20 years, whether it's engines essences ou Diesel. Before starting the work we will of course have to be sure that the malfunction occurs from the turbo of this Kia Pride. But since you are on this page, it indicates that you are most likely aware of the cause.change-turbo-Kia-Pride

How to change the turbo of your Kia Pride

Depending on the turbo to be positioned, part of the procedures may change a little. When you buy a turbocharger it will always be supplied with assembly instructions. The ideal is therefore to follow it point by point. However, in the event that you have not purchased the product, here are the steps to follow in order to replace a turbo compressor on a Kia Pride. Then you will find out if you have the skills. Before starting, make sure you have all of the tools adequate. You are going to need your oil container, a bunch of ratchet wrenches, flat pliers, allen wrenches as well as flat wrenches. Generally, these turbos will be delivered with their tool kit which includes some jointsFew studs and a little oil. We still recommend you go to a mechanic because tinkering from a pit is easier to carry out the manipulations. In addition, the turbocharger happens to be a particularly sensitive element for the Kia Pride. Taking into account that the technique is not really difficult, we still advise you to go to a technician.

  • Drain the engine, then replace this oil filter. Replace a bit of oil, without putting too much. Here is an imperative manipulation!
  • Remove all the plugs around the Kia Pride turbocharger.
  • Examine that there are no desirable non-elements within the casings, given that this is undoubtedly a source of concern.
  • Remove the ducts as well as all of the screws and the nuts which will hold this turbocharger.
  • Remove the existing turbocharger from this Kia Pride.
  • Install the new turbocharger, checking that the locations correspond perfectly
  • Fit the oil return pipe
  • Fit all required screws and nuts
  • Fill the turbocharger with the oil supplied with the turbo
  • Rotate the turbine by hand to operate the turbocharger.
  • Assemble all the elements to the turbocharger of your Kia Pride.
  • Now that when all of the parts turn out to be assembled, you will start the engine and let it run for about ten minutes.

Once everything is in place but also that the engine has been running for some time, it is necessary to take a ride at the wheel of this Kia Pride in order to see that the assembly works well. We also advise you to check the oil level but also the water level quite frequently in the following weeks. Post a comment in case this tutorial was useful to you. See you soon !