Today we can find the turbos on a lot of cars on the market, whether in systems essences ou Diesel. Before starting DIY you will naturally have to be convinced that the hassle arises from the turbo of this Kia Pro Cee D 2. That said, if you are on this page, this means that you probably know the source.
How to change the turbo on your Kia Pro Cee D 2
Compared to the turbo, some of the procedures may fluctuate a little. When you buy a turbocharger, it is systematically delivered with a performance note. The best thing to do is then follow it to the letter. However if you have still not bought the product, discover the main axes to replace a turbo for the Kia Pro Cee D 2. Therefore you will know if you are capable or not. Just before starting, you must have all of the tools required. You are going to have the utility of an oil receptacle, a set of ratchet wrenches, your pliers, allen and flat wrenches. Often, turbochargers turn out to be delivered with a lot of utensils which includes some jointsFew studs and a little oil. We still recommend that you go to a garage simply because working with a pit turns out to be much more practical for doing these procedures. Furthermore, the turbocharger is a fairly sensitive constituent for this Kia Pro Cee D 2. Even if the handling is not extremely complex, we nevertheless advise you to go to a technician.
- Drain the engine and replace your oil filter. Replace a small amount of oil. It is a necessary step!
- Remove all the plugs there are on the turbocharger of this Kia Pro Cee D 2.
- Examine that there are no foreign bodies in the casings, since this is a cause of problem.
- Remove the ducts with all the screws and nuts which hold your turbocharger.
- Remove the existing turbocharger from the Kia Pro Cee D 2.
- Install the famous turbocharger, checking that the seals match precisely
- Install the oil return pipe
- Install all required screws and nuts
- Fill the turbocharger with the oil supplied with the turbo
- Start the turbine with your hands to operate the turbocharger.
- Connect all the components to the Kia Pro Cee D 2 turbocharger.
- Once all the components are assembled, you need to start the engine and run it for 5 to 10 minutes.
Now that everything is in place and of course the engine has been running for at least 5 minutes, you can drive with the Kia Pro Cee D 2 to check that everything is working properly. At the same time, we advise you to check the oil and water level fairly frequently in the weeks that follow. Post a comment in case our guide was helpful. Good road !