Today we find these turbos in most vehicles in circulation, whether in engines essences ou Diesel. Before starting this task, you must obviously be convinced that the problem comes from the turbo of your Kia Provo. That said, since you are on this page, it indicates that you certainly know the cause.
How to change the turbo on your Kia Provo
Depending on the turbo to be positioned, some of the procedures may fluctuate slightly. As soon as you buy a turbocharger, it is usually sold with an Achievement Note. So the best thing to do is to follow it to the letter. On the other hand if you have still not bought the product, here are the operations to do in order to replace a turbo on your Kia Provo. So you will know what capabilities are needed. Just before you start, make sure you have all of the tools required. You will need your oil receptacle, a set of ratchet wrenches, flat pliers, allen and flat wrenches. Typically, these turbos will be sold with a mounting kit that contains joints, studs and a dose oil. We still recommend that you go to a mechanic because working with a pit remains easier to do the work. In addition, the turbocharger is a super fragile component for a Kia Provo. Even if handling is not particularly difficult, we nevertheless advise you to go to a mechanic.
- Drain the engine, then replace this oil filter. Add a little oil, but very little. It is a necessary manipulation!
- Remove all the plugs found around the turbocharger of your Kia Provo.
- Check that there are no foreign bodies in the housings, since this is sometimes a source of malfunction.
- Remove the ducts with all the screws and the nuts that will support this turbocharger.
- Remove the failed turbocharger from the Kia Provo.
- Install the brand new turbocharger, checking that the seals match exactly
- Replace the oil return pipe
- Install all the necessary screws and nuts
- Fill the turbocharger with the supplied oil
- Operate the turbine by hand so as to operate the turbocharger.
- Assemble all the components to the Kia Provo turbocharger.
- Once all of the components are installed, you will start the engine and let it run for a few minutes.
Now that everything is set and screwed and of course the car has been running for at least 5 minutes, you should take a drive behind the wheel of the Kia Provo so that you can see that everything is working properly. It is advisable at the same time to watch the oil level but also the water regularly in the days to come. Leave a comment if our text has ever been useful. Good road !