Now we find the turbos on a lot of cars in circulation, whether it's engines essences ou Diesel. Before you start DIY, you will of course have to be convinced that the hassle comes from the turbo of your Kia Rio 3. However, since you have arrived so far, this shows that you probably know the reason.
How to change the turbo on your Kia Rio 3
Depending on the turbo to be installed, processes can vary very slightly. As soon as you buy a turbo it will always be delivered with an assembly note. The ideal is therefore to follow it point by point. However in the event that you have not made the purchase, here are the main axes to change a turbo on the Kia Rio 3. This way you will know if you have the skills. Just before you start, make sure you have all of the tools required. You are going to use a receptacle for engine oil, a set of ratchet wrenches, flat pliers, your allen and flat wrenches. In general, these turbos prove to be sold with a mounting kit which includes joints, studs as well as a little oil. However, we advise you to have a specialist check that tinkering with a pit is even more convenient for doing this kind of work. In addition, the turbo is a fairly fragile component for a Kia Rio 3. Even if handling is not very difficult, it is still advisable to go to a mechanic.
- Drain the engine block then change your oil filter. Add a little oil, in small quantities. This is an inevitable phase!
- Remove all of the plugs from the Kia Rio 3 turbo.
- Examine that there are no foreign bodies in the casings, since this is undoubtedly a source of dysfunction.
- Remove the conduits with each of the screws and then the nuts which will hold your turbo.
- Remove the existing turbo from the Kia Rio 3.
- Fit the all-new turbo, checking that the locations stick precisely
- Refit the oil return pipe
- Replace all the necessary screws and nuts
- Fill the turbo with the oil supplied with the turbo
- Start the turbine by hand to activate the turbo.
- Reconnect all components to the Kia Rio 3's turbo.
- Once all the components turn out to be assembled, you can start the engine block and let it run for a few minutes.
Once everything is installed and screwed and of course the car has been running for at least 5 minutes, it is necessary to walk around with the Kia Rio 3 to check that the assembly works properly. We also advise you to check the oil and water level fairly often for 15 days. Post a comment if you have ever used this text. Enjoy the road!