Now we find these turbos in most new automobiles, whether in systems essences ou Diesel. Before starting the work you will naturally have to be sure that the hassle comes from the turbo of your Kia Rio 4. However since you have arrived so far, this reveals that you probably know the reason.change-turbo-Kia-Rio-4

How to change the turbo on your Kia Rio 4

Compared to the turbo to set up, manipulations can fluctuate a little. In case you get a turbo it will always be sold with a performance note. The best thing to do then is to follow it step by step. However, if you have still not made the purchase, discover the steps to follow to change a turbo for a Kia Rio 4. Thereafter you will know what capacities are necessary. Before starting, you must have all of the tools indispensable. You are going to have the use of a receptacle for engine oil, a bunch of ratchet wrenches, flat pliers, your allen and flat wrenches. Most of the time, the turbos will be supplied with their mounting kit which includes some jointsFew studs but also a portion oil. However, we recommend that you have a specialist check it out since working with a pit is much more convenient for carrying out the work. What is more, the turbo is an extremely sensitive element on a Kia Rio 4. You should know that the technique is not super complex, we still advise you to go to a garage.

  • Drain the engine and change the oil filter. Add a little oil, in small quantities. Here is an imperative manipulation!
  • Remove all the plugs found on the turbo of the famous Kia Rio 4.
  • Check that there are no residues at the casings, because this is undoubtedly a source of concern.
  • Remove the conduits and each of the screws as well as the nuts which will hold the turbo.
  • Put the turbo in place in your Kia Rio 4.
  • Fit the all-new turbo, checking that the locations fully match
  • Refit the oil return pipe
  • Replace the required screws and nuts
  • Fill the turbo with oil from your syringe
  • Operate the turbine manually to activate the turbo.
  • Assemble all the turbo connections of your Kia Rio 4.
  • Now that when the parts are assembled, you can start the engine and run it for a few minutes.

Once everything is in place but also that the engine has been running for a while, you can walk around with your Kia Rio 4 to check that everything is working properly. It is also advisable to check the amount of oil and water fairly frequently in the weeks that follow. Write a comment in case this tutorial was useful. Good road !