Today we can find these turbos in a large part of the vehicles on the market, as much on the engines essences ou Diesel. Before starting the work, you will obviously have to be sure that the problem comes from the turbo of the famous Kia Sephia 2. However, if you have made it this far, you probably know the source.
How to change the turbo of your Kia Sephia 2
Depending on the turbo to set up, handling can change a bit. When you buy a turbo it will always be sold with assembly instructions. Your best bet then is to read it. But if you have not yet made the purchase, find out what to do to replace a turbo compressor in this Kia Sephia 2. Therefore you will know if you are able or not. Just before you start, you must have all the tools adequate. You will need an oil receptacle, a set of ratchets, your flat pliers, allen wrenches as well as flats. Typically, these turbochargers will be supplied with a mounting kit that contains joints, studs and a syringe oil. It is still advisable to have a pro checked because tinkering with a pit is much easier for this kind of process. And of course, the turbo is a particularly fragile component for this Kia Sephia 2. Even though handling is not really difficult, we nevertheless advise you to go to a technician.
- Drain the engine block then replace the oil filter. Add a little oil, without adding too much. It is a necessary procedure!
- Remove all the plugs present on the turbo of your Kia Sephia 2.
- Check that there are no foreign bodies in the casings, since this is sometimes a source of problem.
- Remove the ducts and of course each of the screws but also the nuts which hold the turbo.
- Remove the turbo in place in this Kia Sephia 2.
- Set up the brand new turbo, checking that the seals match completely
- Fit the oil return pipe
- Install each of the screws and nuts you removed
- Fill the turbo with the oil supplied with the turbo
- Start the turbine manually to turn the turbo.
- Assemble all the components to the turbo of your Kia Sephia 2.
- Once each of the parts are assembled, you must turn on the engine block and let it run for 5 to 10 minutes.
Once everything is in order, but also that the engine has been running for at least 5 minutes, you can walk around in this Kia Sephia 2 to check that the whole thing is working. It is also advisable to check the oil level but also the water level regularly in the days to come. Write a comment if this tutorial was useful to you. Good road !