Nowadays there are turbos in a large part of the automobiles on the market, as much on systems essences ou Diesel. Just before you start the work, it is of course necessary to be sure that the problem arises from the turbo of this Kia Sorento 2. However, since you are reading to us, it is that you probably know the cause .
How to change the turbo on your Kia Sorento 2
Depending on the turbo to be installed, methods may fluctuate very slightly. When you get a turbo it is usually supplied with an assembly note. The best is therefore that you follow it to the letter. However in the event that you have not made the purchase, you will find below the main axes to be able to change a turbo on the Kia Sorento 2. Consequently you will know if you are able or not. Just before you start, make sure you have all the tools required. You will need your oil container, a set of ratchet wrenches, flat pliers, allen and flat wrenches. Usually turbochargers are supplied with a tool kit which contains a few jointsFew studs as well as a little oil. We still suggest you go to a pro because working with a pit turns out to be much easier to carry out these manipulations. What is more, the turbo happens to be a really delicate constituent for the Kia Sorento 2. Even if the technique is not frankly laborious, it is nevertheless advised to go to a professional.
- Drain the engine and change the oil filter. Add a little oil, but not too much. This is a mandatory manipulation!
- Remove all the plugs around the turbo of the Kia Sorento 2.
- Check that there are no undesirable elements inside the casings, since this is undoubtedly a source of concern.
- Remove the ducts with all the screws and the nuts that support the turbo.
- Remove the faulty turbo from the Kia Sorento 2.
- Install the famous turbo, checking that the locations correspond completely
- Replace the oil return pipe
- Install the required screws and nuts
- Fill the turbo with the oil supplied with the turbo
- Operate the turbine by hand to operate the turbo.
- Refix all the elements to the turbo of this Kia Sorento 2.
- Once the components are mounted, you can start the engine and run it for a few minutes.
Once the turbo is in place and of course the car has been running for a few minutes, you should walk around in the Kia Sorento 2 in order to check that the whole thing runs smoothly. We also advise you to check the oil level but also the water level quite frequently in the following weeks. Post a comment in case this guide was useful to you. Good walk !