Now we can find these turbos in a large part of new cars, as much on systems essences ou Diesel. Just before starting this task you will of course have to be sure that the problem is caused by the turbo of the famous Kia Sorento 3. However, since you are on this page, it means that you probably know the cause.
How to change the turbo on your Kia Sorento 3
Depending on the turbo to install, handling can fluctuate a bit. As soon as you purchase a turbocharger the product will usually be delivered with an assembly note. The best is therefore to follow it point by point. However, in the event that you have not made the purchase, you will find below the main axes so as to replace a turbo in a Kia Sorento 3. So you will know if you have the skills. Before you start, be careful to have all the tools required. You will need a container for the oil, a set of ratchets, your flat pliers, your allen and flat wrenches. As a rule, turbos will be sold with their utensil set which contains joints, studs but also a little oil. We still advise you to go to a garage since working with a pit turns out to be easier to do these manipulations. In addition, the turbocharger turns out to be an extremely fragile element for a Kia Sorento 3. You should know that the technique is not very complex, it is nevertheless advisable to go to a specialist.
- Drain the engine block and replace your oil filter. Add a little oil, but not too much. This is an imperative step!
- Remove all the caps that are on the turbocharger of your Kia Sorento 3.
- Check that no undesirable elements are found in the housings, as this is undoubtedly a cause of malfunction.
- Remove the ducts with all the screws and then the nuts which will hold your turbocharger.
- Remove the existing turbocharger from this Kia Sorento 3.
- Reassemble the new turbocharger, checking that the locations match exactly
- Replace the oil return pipe
- Install the required screws and nuts
- Fill the turbocharger with oil from your syringe
- Rotate the turbine by hand to rotate the turbocharger.
- Assemble all the components to the Kia Sorento 3 turbocharger.
- Now that when the parts turn out to be in place, you will start the engine block and let it run for about ten minutes.
Now that everything is in order and the engine has been running for at least 5 minutes, feel free to drive this Kia Sorento 3 to check that everything is running smoothly. At the same time, it is advisable to check the oil and water level quite frequently in the following weeks. Leave a comment if our guide helped you. Good walk !