Nowadays you can find turbos in most new vehicles, whether in engines essences ou Diesel. Just before you start DIY, it is obviously necessary to be convinced that the problem arises from the turbo of this Kia Stinger. But since you are on this page, it means that you probably know the reason.change-turbo-Kia-Stinger

How to change the turbo of your Kia Stinger

Compared to the turbo to be implemented, the methods will be able to change a little. As soon as you get a turbo, the product is generally delivered with an assembly manual. The best thing to do is while you read it. That said, in the event that you have not made the purchase, here are the steps to follow in order to replace a turbo for the Kia Stinger. Therefore you will know if you have the skills. Just before you start, be careful to have all the tools required. You are going to need your receptacle for engine oil, a set of ratchet wrenches, flat pliers, your allen and flat wrenches. Generally, these turbos will be provided with their lot of utensils including joints, studs but also a portion oil. However, we advise you to go see a pro since tinkering with a pit is easier for this kind of process. In addition, the turbo turns out to be a rather delicate component for this Kia Stinger. Taking into account that the technique is not extremely difficult, we still advise you to go to a technician.

  • Change the engine oil then replace your oil filter. Add a bit of oil, but not too much. It is an essential procedure!
  • Remove all plugs from the Kia Stinger's turbo.
  • Check that there are no residues in the casings, since this is undoubtedly a cause of problem.
  • Remove the conduits with each of the screws and the nuts which hold your turbo.
  • Remove the existing turbo from the Kia Stinger.
  • Set up the new turbo, checking that the locations stick precisely
  • Install the oil return pipe
  • Replace each of the screws and nuts you removed
  • Fill the turbo with the oil supplied with the turbo
  • Manually rotate the turbine to activate the turbo.
  • Re-attach all of the components to the Kia Stinger's turbo.
  • Once each of the components are in place, you will be able to start the engine and run it for 5 to 10 minutes.

Once the assembly is installed and the engine has been running for ten minutes, you can drive with the Kia Stinger so that you can see that everything is running smoothly. At the same time, we advise you to watch the oil and water level quite often in the coming days. Post a comment if this tutorial served you well. See you soon !