Nowadays we find the turbos in most cars on the market, whether it's engines essences ou Diesel. Just before embarking on this task you will obviously have to be convinced that the concern arises from the turbo of this Kia Stonic. But since you are reading this article, it is because you certainly know the cause.
How to change the turbo of your Kia Stonic
Compared to the turbo to be positioned, some of the processes may change a little. When you buy a turbocharger it will be systematically sold with an assembly manual. It is best to follow it point by point. Nevertheless in the event that you have not made the purchase, here are the main lines to replace a turbo in this Kia Stonic. In fact you will know if you are capable of it or not. Just before you start, make sure you have all of the tools adequate. You are going to have the utility of your receptacle for oil, a bunch of ratchet wrenches, your pliers, allen and flat wrenches. Most of the time, these turbochargers will be delivered with a mounting kit that includes joints, studs and a syringe oil. We still recommend that you have a mechanic check since working with a pit is much more practical for these procedures. Furthermore, the turbocharger turns out to be an extremely sensitive element for this Kia Stonic. Taking into account that the operation is not particularly complicated, we still advise you to go to a garage.
- Drain the engine block and replace your oil filter. Put back a sprig of oil, without putting too much. It is an essential procedure!
- Remove all the plugs from the turbocharger of your Kia Stonic.
- Check that there are no undesirable elements inside the casings, as this is a source of problem.
- Remove the conduits and of course all the screws and nuts that will hold your turbocharger.
- Place the turbocharger in place in your Kia Stonic.
- Reassemble the famous turbocharger, checking that the locations are completely suitable
- Install the oil return pipe
- Replace the screws and nuts you removed
- Fill the turbocharger with the supplied oil
- Rotate the turbine by hand so that the turbocharger turns.
- Reconnect all the connections to the Kia Stonic's turbocharger.
- As soon as the parts turn out to be assembled, you must start the engine block and let it run for a few minutes.
Now that everything is in place but also that the car has been running for 5 to 10 minutes, you need to take a ride with your Kia Stonic in order to check that everything is working properly. We also advise you to check the quantity of oil and water often enough for 15 days. Write a comment if this tutorial has ever been useful. Enjoy again!