Nowadays you can find the turbos on a lot of automobiles from the last 20 years, whether it's for systems essences ou Diesel. Just before starting the DIY it will of course have to be certain that the hassle arises from the turbo of the famous Kiaage 2. However, since you are reading this article, it is that you certainly know the reason.change-turbo-Kiaage-2

How to change the turbo on your Kiaage 2

Depending on the turbo to be installed, some of the processes may change a little. As soon as you get a turbocharger, it will always be supplied with an assembly manual. The ideal is therefore to follow it point by point. However, if you have not yet made the purchase, here are the main points in order to change a turbo compressor for a Kiaage 2. In this way you will understand whether you are capable of it or not. Just before you start, be careful to have all of the tools indispensable. You are going to need your oil receptacle, a set of ratchet wrenches, your flat pliers, allen and flat wrenches. Usually, turbos will be delivered with their mounting kit which contains joints, studs and a little oil. It is nevertheless advisable to go to a mechanic because tinkering with a pit turns out to be much more convenient to carry out this kind of process. And of course, the turbocharger remains a fairly delicate component on a Kiaage 2. You should know that the technique is not particularly complicated, we still advise you to go to a mechanic.

  • Drain the engine and change this oil filter. Add a little oil, without putting too much. This is a necessary procedure!
  • Remove all the plugs found on the turbocharger of the famous Kiaage 2.
  • Check that there are no foreign bodies in the housings, since this is undoubtedly a cause of problem.
  • Remove the ducts but also all of the screws and the nuts which hold this turbocharger.
  • Remove the faulty turbocharger from the Kiaage 2.
  • Install the brand new turbocharger, checking that the locations are perfectly suitable
  • Refit the oil return pipe
  • Reinstall all required screws and nuts
  • Fill the turbocharger with oil from your syringe
  • Rotate the turbine by hand to rotate the turbocharger.
  • Assemble all the connections to the turbocharger of this Kiaage 2.
  • As soon as all the components are installed, you can start the engine and let it run for 5 to 10 minutes.

Once the assembly is installed and the car has been running for a while, you will be able to take a ride with the Kiaage 2 in order to examine that everything is working well. We also advise you to check the oil level as well as the water level quite frequently in the weeks that follow. Leave a comment in case our text was useful to you. Good walk !