Now we can find turbos on many new automobiles, whether it's systems essences ou Diesel. Just before starting the DIY you should obviously be convinced that the malfunction is due to the turbo of this Kiaage 3. However, seeing that you have come this far, it reveals that you most likely know the reason.change-turbo-Kiaage-3

How to change the turbo on your Kiaage 3

Compared to the turbo to be presented, the methods will be able to fluctuate slightly. When you buy a turbo it usually comes with an assembly note. The ideal is then to follow it point by point. However, in the event that you have not made the purchase, here is the operations to be done to be able to change a turbo on the Kiaage 3. In fact, you will know what capacities are necessary. Just before starting, you must have all the tools required. You will need a container for the oil, a set of ratchets, your flat pliers, allen wrenches as well as flat keys. Usually, turbos turn out to come with their tool kit including joints, studs and a syringe oil. We still recommend that you go see a pro quite simply because working with a pit turns out to be much more practical to do these manipulations. What is more, the turbo is a rather fragile element on the Kiaage 3. Even if the operation is not really complex, it is still advisable to go to a technician.

  • Drain the engine block and change your oil filter. Put a bit of oil, in a small quantity. This is an imperative phase!
  • Remove the various plugs found around the turbo of the famous Kiaage 3.
  • Watch that no residue is found on the casings, because that can be a cause of concern.
  • Remove the ducts and of course all the screws but also the nuts that will support your turbo.
  • Remove the faulty turbo from the Kiaage 3.
  • Reassemble the new turbo, checking that the locations match completely
  • Install the oil return pipe
  • Mount the screws and nuts you removed
  • Fill the turbo with oil from your syringe
  • Start the turbine manually to operate the turbo.
  • Refit the various components to the turbo of your Kiaage 3.
  • Once the components are in place, you will start the engine block and run it for about ten minutes.

Now that the assembly is installed but also that the car has been running for a while, you can walk around behind the wheel of the Kiaage 3 in order to check that the assembly turns correctly. At the same time, we advise you to check the oil and water level quite often in the days to come. Post a comment if our guide was useful to you. Enjoy again!