Nowadays we find the turbos on a lot of vehicles from the last 20 years, as much on the engines essences ou Diesel. Before you start DIY, you will of course have to be certain that the problem comes from the turbo of your Kiaage. However if you are reading this article it means that you probably know the reason.change-turbo-Kiaage

How to change the turbo of your Kiaage

Compared to the turbo to be positioned, methods will be able to change a little. When you get a turbo the product will always be sold in the company of a manual. It is best to follow it to the letter. However in case you still haven't bought the product, find out the main lines to be able to change a turbo compressor in this Kiaage. This way you will know if you are capable of it or not. Just before you start, make sure you have all of the tools required. You are going to need a receptacle for engine oil, a set of ratchet wrenches, a flat pliers, your allen and flat wrenches. Usually, turbochargers will be sold with their mounting kit which contains joints, studs as well as a syringe oil. However, we advise you to go see a specialist since working with a pit is much easier to do the work. And of course, the turbo happens to be a pretty tricky component on this Kiaage. You should know that the operation is not really laborious, we still advise you to go to a specialist.

  • Drain the engine block and change your oil filter. Add a small amount of oil. It is an essential manipulation!
  • Remove all the plugs around the Kiaage's turbo.
  • Check that there are no foreign bodies in the casings, since this is undoubtedly a source of malfunction.
  • Remove the conduits and of course all the screws but also the nuts which hold your turbo.
  • Remove the turbo in place in the Kiaage.
  • Refit the all-new turbo, checking that the slots stick completely
  • Fit the oil return pipe
  • Refit the necessary screws and nuts
  • Fill the turbo with the oil supplied with the turbo
  • Operate the turbine by hand so as to operate the turbo.
  • Assemble all the elements in the turbo of this Kiaage.
  • Once the components turn out to be installed, you will start the engine block and run it for 5 to 10 minutes.

Once the assembly is installed but also that the car has been running for 5 to 10 minutes, it is possible to take a turn behind the wheel of the Kiaage to check that everything is turning properly. It is also advisable to check the oil and water level fairly frequently in the following weeks. Write a comment if our text helped you. Good walk !