Today we can find the turbos on many vehicles in the last 20 years, whether it's systems essences ou Diesel. Before starting the work it is of course necessary to be certain that the problem arises from the turbo of your Lancia Aurelia. But since you're reading from us, it shows that you probably know the source.
How to change the turbo on your Lancia Aurelia
Depending on the turbo to install, methods may change a little. When you get a turbocharger, it is always supplied with an assembly manual. The best is therefore to follow it point by point. That said, if you have not purchased the product, here are the steps to take to change a turbo compressor for the Lancia Aurelia. So you will understand whether you are capable of it or not. Before you start, make sure you have all the tools indispensable. You will need an oil container, a bunch of ratchet wrenches, flat pliers, allen wrenches as well as flat wrenches. Generally, turbochargers will be supplied with their mounting kit which contains some jointsFew studs but also a portion oil. However, we suggest that you have a specialist check since tinkering with a pit is more convenient for doing the procedures. What is more, the turbocharger is an extremely fragile element for the Lancia Aurelia. Even if the technique is not downright complicated, we still advise you to go to a specialist.
- Change the engine oil and change your oil filter. Put back a sprig of oil, without putting too much. This is an imperative procedure!
- Remove all the plugs found on the turbocharger of this Lancia Aurelia.
- Check that there are no residues in the crankcases, since this can be a source of malfunction.
- Remove the ducts and all of the screws but also the nuts that will hold your turbocharger.
- Remove the turbocharger in place in the Lancia Aurelia.
- Install the new turbocharger, checking that the locations fully stick
- Replace the oil return pipe
- Reinstall all the required screws and nuts
- Fill the turbocharger using oil from your syringe
- Start the turbine manually to operate the turbocharger.
- Reconnect all the connections to the turbocharger of your Lancia Aurelia.
- Now that all of the parts have been installed, you need to start the engine and run it for 5-10 minutes.
Once the turbo is in place but also that the engine has been running for at least 5 minutes, you must walk around behind the wheel of the Lancia Aurelia in order to see that the assembly runs smoothly. We also advise you to check the oil level but also the water level regularly in the coming days. Write a comment in case our tutorial helped you. Enjoy the road!